Applications for the LAMP Fellowship 2025-26 will open soon. Sign up here to be notified when the dates are announced.
The Uttarakhand Assembly concluded a two-day session on November 30, 2022. The session was scheduled to be held over five days. In this post we look at the legislative business that was carried out in the Assembly, and the state of state legislatures.
13 Bills were introduced and passed within two days
As per the Session Agenda, a total of 19 Bills were listed for introduction in the span of two days. 13 of these were listed to be discussed and passed on the second day. These included the Uttarakhand Protection of Freedom of Religion (Amendment) Bill, 2022, University of Petroleum and Energy Studies (Amendment), Bill, 2022, and the Uttarakhand Anti-Littering and Anti-Spitting (Amendment) Bill, 2022.
The Assembly had proposed to discuss and pass each Bill (barring two) within five minutes (see Figure 1). Two Bills were allocated 20 minutes each for discussion and passing - the Haridwar Universities Bill, 2022, and the Public Service (Horizontal Reservation for Women) Bill, 2022. As per news reports, the Assembly passed all 13 Bills within these two days (this excludes the Appropriation Bills). This raises the question on the amount of scrutiny that these Bills were subject to, and the quality of such laws when the legislature intends to pass them within mere minutes.
Figure 1: Excerpt of Uttarakhand Assembly's November 2022 Session Agenda
Law making requires deliberation, scrutiny
Our law-making institutions have several tools at their disposal to ensure that before a law is passed, it has been examined thoroughly on various aspects such as constitutionality, clarity, financial and technical capacity of the state to implement provisions, among others. The Ministry/Department piloting a Bill could share a draft of the Bill for public feedback (pre-legislative scrutiny). While Bills get introduced, members may raise issues on constitutionality of the proposed law. Once introduced, Bills could be sent to legislative committees for greater scrutiny. This allows legislators to deliberate upon individual provisions in depth, understand if there may be constitutional challenges or other issues with any provision. This also allows experts and affected stakeholders to weigh in on the provisions, highlight issues, and help strengthen the law.
However, when Bills are introduced and passed within mere minutes, it barely gives legislators the time to go through the provisions and mull over implications, issues, or ways to improve the law for affected parties. It also raises the question of what the intention of the legislature is when passing laws in a hurry without any discussion. Often, such poorly thought laws are also challenged in Courts.
For instance, the Uttarakhand Assembly passed the Uttarakhand Freedom of Religion (Amendment) Bill, 2022 in this session (five minutes had been allocated for the discussion and passing of the Bill). The 2022 Bill amends the 2018 Act which prohibits forceful religious conversions, and provides that conversion through allurement or marriage will be unlawful. The Bill has provisions such as requiring an additional notice to be sent to the District Magistrate (DM) for a conversion, and that reconversion to one’s immediate previous religion will not be considered a conversion. Some of these provisions seem similar to other laws that were passed by states and have been struck down by or have been challenged in Courts. For example, the Madhya Pradesh High Court while examining the Madhya Pradesh Freedom of Religion Act, 2021 noted that providing a notice to the DM for a conversion of religion violates the right to privacy as the right includes the right to remain silent. It extends that understanding to the right to decide on one’s faith. The Himachal Pradesh Freedom of Religion Act, 2006 exempted people who reconvert to their original religion from giving a public notice of such conversion. The Himachal Pradesh High Court had struck down this provision as discriminatory and violative of the right to equality. The Court also noted that the right to change one’s belief cannot be taken away for maintaining public order.
Uttarakhand MLAs may not have had an opportunity to think about how issues flagged by Courts may be addressed in a law that regulates religious conversions.
Most other state Assemblies also pass Bills without adequate scrutiny
In 2021 44% states passed Bills on the day it was introduced or on the next day. Between January 2018 and September 2022, the Gujarat Assembly introduced 92 Bills (excluding Appropriation Bills). 91 of these were passed in the same day as their introduction. In the 2022 Monsoon Session, the Goa Assembly passed 28 Bills in the span of two days. This is in addition to discussion and voting on budgetary allocation to various government departments.
Figure 2: Time taken by state legislatures to pass Bills in 2021
Note: The chart above does not include Arunachal Pradesh and Sikkim. A Bill is considered passed within a day if it was passed on the day of introduction or on the next day. For states with bicameral legislatures, bills have to be passed in both Houses. This has been taken into account in the above chart for five states having Legislative Councils, except Bihar (information was not available for Council).
Sources: Assembly websites, E-Gazette of various states and Right to Information requests; PRS.
Occasionally, the time actually spent deliberating upon a Bill is lesser than the allocated time. This may be due to disruptions in the House. The Himachal Pradesh Assembly provides data on the time actually spent discussing Bills. For example, in the August 2022 Session, it spent an average of 12 minutes to discuss and pass 10 Bills. However, the Uttarakhand Assembly allocated only five minutes to discuss each Bill in its November 2022 Session. This indicates the lack of intent of certain state legislatures to improve their functioning.
In the case of Parliament, a significant portion of scrutiny is also carried out by the Department Related Standing Committees, even when Parliament is not in session. In the 14th Lok Sabha (LS), 60% of the Bills introduced were sent to Committees for detailed examination, and in the 15th LS, 71% were sent. These figures have reduced recently – in the 16th LS 27% of the Bills were sent to Committees, and so far in the 17th LS, 13% have been sent. However, across states, sending Bills to Committees for detailed examination is often the exception than the norm. In 2021, less than 10% of the Bills were sent to Committees. None of the Bills passed by the Uttarakhand Assembly had been examined by a committee. States that are an exception here include Kerala which has 14 subject Committees, and Bills are regularly sent to these for examination. However, these Committees are headed by their respective Ministers, which reduces the scope of independent scrutiny that may be undertaken.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
Method of calculation |
Recommendation and its status |
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.