Applications for the LAMP Fellowship 2025-26 will open soon. Sign up here to be notified when the dates are announced.
The ongoing Monsoon Session of Parliament is being widely viewed as the 'make or break' session for passing legislation before the end of the 15th Lok Sabha in 2014. Hanging in balance are numerous important Bills, which will lapse if not passed before the upcoming 2014 national elections. Data indicates that the current Lok Sabha has passed the least number of Bills in comparison to other comparable Lok Sabhas. The allocated time to be spent on legislation in the Monsoon Session is also below the time recommended for discussion and passing of Bills by the Business Advisory Committee of the Lok Sabha. Eight out of a total of 16 sittings of the Monsoon Session have finished with only 15 percent of the total time spent productively. Success rate of the 15th Lok Sabha in passing legislation India’s first Lok Sabha (1952-1957) passed a total of 333 Bills in its five year tenure. Since then, every Lok Sabha which has completed over three years of its full term has passed an average of 317 Bills. Where a Lok Sabha has lasted for less than 3 years, it has passed an average of 77 Bills. This includes the 6th, 9th, 11th and 12th Lok Sabhas. The ongoing 15th Lok Sabha, which is in the fifth year of its tenure, has passed only 151 Bills (This includes the two Bills passed in the Monsoon Session as of August 18, 2013). In terms of parliamentary sessions, Lok Sabhas that have lasted over three years have had an average of fifteen sessions. The 15th Lok Sabha has finished thirteen parliamentary sessions with the fourteenth (Monsoon Session) currently underway. 
Legislative business accomplished in the 15th Lok Sabha For the 15th Lok Sabha, a comparison of the government's legislative agenda at the beginning of a parliamentary session with the actual number of Bills introduced and passed at the end of the session shows that: (i) on average, government has a success rate of getting 39 percent of Bills passed; and (ii) on average, 60 percent success rate in getting Bills introduced. 
The Monsoon Session of Parliament was scheduled to have a total of 16 sitting days between August 5-30, 2013. Of the 43 Bills listed for consideration and passage, 32 are Bills pending from previous sessions. As of August 18, 2013, the Rajya Sabha had passed a total of five Bills while the Lok Sabha had passed none. Of the 25 Bills listed for introduction, ten have been introduced so far. The Budget Session of Parliament earlier this year saw the passage of only two Bills, apart from the appropriation Bills, of the 38 listed for passing. These were the Protection of Women Against Sexual Harassment at Workplace Bill and the Criminal Law (Amendment) Bill. Time allocated for legislation in the Monsoon Session The Lok Sabha is scheduled to meet for six hours and the Rajya Sabha for five hours every day. Both houses have a question hour and a zero hour at the beginning of the day, which leaves four hours for legislative business in the Lok Sabha and three hours in the Rajya Sabha. However, both Houses can decide to meet for a longer duration. For example, Rajya Sabha has decided to meet till 6:00 PM every day in the Monsoon Session as against the normal working hours of the House until 5:00 PM. The Business Advisory Committee (BAC) of both Houses recommends the time that should be allocated for discussion on each Bill. This session's legislative agenda includes a total of 43 Bills to be passed by Parliament. So far, 30 of the Bills have been allocated time by the BAC, adding up to a total of 78 hours of discussion before passing. If the Lok Sabha was to discuss and debate the 30 Bills for roughly the same time as was recommended by the BAC, it would need a minimum of 20 working days. In addition, extra working days would need to be allocated to discuss and debate the remaining 13 Bills. With eight sitting days left and not a single Bill being passed by the Lok Sabha, it is unclear how the Lok Sabha will be able to make up the time to pass Bills with thorough debate.
The Financial Resolution and Deposit Insurance Bill, 2017 was introduced in Lok Sabha during Monsoon Session 2017. The Bill is currently being examined by a Joint Committee of the two Houses of Parliament. It seeks to establish a Resolution Corporation which will monitor the risk faced by financial firms such as banks and insurance companies, and resolve them in case of failure. For FAQs explaining the regulatory framework under the Bill, please see here.
Over the last few days, there has been some discussion around provisions of the Bill which allow for cancellation or writing down of liabilities of a financial firm (known as bail-in).[1],[2] There are concerns that these provisions may put depositors in an unfavourable position in case a bank fails. In this context, we explain the bail-in process below.
What is bail-in?
The Bill specifies various tools to resolve a failing financial firm which include transferring its assets and liabilities, merging it with another firm, or liquidating it. One of these methods allows for a financial firm on the verge of failure to be rescued by internally restructuring its debt. This method is known as bail-in.
Bail-in differs from a bail-out which involves funds being infused by external sources to resolve a firm. This includes a failing firm being rescued by the government.
How does it work?
Under bail-in, the Resolution Corporation can internally restructure the firm’s debt by: (i) cancelling liabilities that the firm owes to its creditors, or (ii) converting its liabilities into any other instrument (e.g., converting debt into equity), among others.[3]
Bail-in may be used in cases where it is necessary to continue the services of the firm, but the option of selling it is not feasible.[4] This method allows for losses to be absorbed and consequently enables the firm to carry on business for a reasonable time period while maintaining market confidence.3 The Bill allows the Resolution Corporation to either resolve a firm by only using bail-in, or use bail-in as part of a larger resolution scheme in combination with other resolution methods like a merger or acquisition.
Do the current laws in India allow for bail-in? What happens to bank deposits in case of failure?
Current laws governing resolution of financial firms do not contain provisions for a bail in. If a bank fails, it may either be merged with another bank or liquidated.
In case of bank deposits, amounts up to one lakh rupees are insured by the Deposit Insurance and Credit Guarantee Corporation (DICGC). In the absence of the bank having sufficient resources to repay deposits above this amount, depositors will lose their money. The DICGC Act, 1961 originally insured deposits up to Rs 1,500 and permitted the DICGC to increase this amount with the approval of the central government. The current insured amount of one lakh rupees was fixed in May 1993.[5] The Bill has a similar provision which allows the Resolution Corporation to set the insured amount in consultation with the RBI.
Does the Bill specify safeguards for creditors, including depositors?
The Bill specifies that the power of the Corporation while using bail-in to resolve a firm will be limited. There are certain safeguards which seek to protect creditors and ensure continuity of critical functions of the firm. 
When resolving a firm through bail-in, the Corporation will have to ensure that none of the creditors (including bank depositors) receive less than what they would have been entitled to receive if the firm was to be liquidated.[6],[7]
Further, the Bill allows a liability to be cancelled or converted under bail-in only if the creditor has given his consent to do so in the contract governing such debt. The terms and conditions of bank deposits will determine whether the bail-in clause can be applied to them.
Do other countries contain similar provisions?
After the global financial crisis in 2008, several countries such as the US and those across Europe developed specialised resolution capabilities. This was aimed at preventing another crisis and sought to strengthen mechanisms for monitoring and resolving sick financial firms.
The Financial Stability Board, an international body comprising G20 countries (including India), recommended that countries should allow resolution of firms by bail-in under their jurisdiction. The European Union also issued a directive proposing a structure for member countries to follow while framing their respective resolution laws. This directive suggested that countries should include bail-in among their resolution tools. Countries such as UK and Germany have provided for bail-in under their laws. However, this method has rarely been used.7,[8] One of the rare instances was in 2013, when bail-in was used to resolve a bank in Cyprus.
———————————————–
[1] ‘Modi government’s FRDI bill may take away all your hard-earned money’, India Today, December 5, 2017, http://indiatoday.intoday.in/story/frdi-bill-banking-reforms-modi-government-india-parliament/1/1103422.html.
[2] ‘Bail-in doubts — on financial resolution legislation’, The Hindu, December 5, 2017, http://www.thehindu.com/opinion/editorial/bail-in-doubts/article21261606.ece.
[3] Section 52, The Financial Resolution and Deposit Insurance Bill, 2017.
[4] Report of the Committee to Draft Code on Resolution of Financial Firms, September 2016, http://www.prsindia.org/uploads/media/Financial%20Resolution%20Bill,%202017/FRDI%20Bill%20Drafting%20Committee%20Report.pdf.
[5] The Deposit Insurance and Credit Guarantee Corporation Act, 1961, https://rbidocs.rbi.org.in/rdocs/Publications/PDFs/dicgc_act.pdf. s
[6] Section 55, The Financial Resolution and Deposit Insurance Bill, 2017.
[7] The Bank of England’s approach to resolution, October 2014, Bank of England.
[8] Recovery and resolution, BaFin, Federal Financial Supervisory Authority of Germany, https://www.bafin.de/EN/Aufsicht/BankenFinanzdienstleister/Massnahmen/SanierungAbwicklung/sanierung_abwicklung_artikel_en.html.
