Applications for the LAMP Fellowship 2025-26 will open on December 1, 2024. Sign up here to be notified. Last date for submitting the applications is December 21, 2024.
Yesterday, the BJP announced its candidate for the upcoming election of the President, which is scheduled to be held on July 17. In light of this, we take a look at the manner in which the election to the office of the President is conducted, given his role and relevance in the Constitutional framework.
In his report to the Constituent Assembly, Jawaharlal Nehru had explained, “we did not want to make the President a mere figurehead like the French President. We did not give him any real power but we have made his position one of great authority and dignity.” His comment sums up the role of the President as intended by our Constitution framers. The Constituent Assembly was clear to emphasise that real executive power would be exercised by the government elected directly by citizens. It is for this reason that, in performing his duties, the President functions on the aid and advise of the government.
However, it is also the President who is regarded as the Head of the State, and takes the oath to ‘protect and defend the Constitution and law’ (Article 60 of the Constitution). In order to elect a figure head who would embody the higher ideals and values of the Constitution, the Constituent Assembly decided upon an indirect method for the election of the President.
The President is elected by an Electoral College. While deciding on who would make up the electoral college, the Constituent Assembly had debated several ideas. Dr. B.R Ambedkar noted that the powers of the President extend both to the administration of the centre as well as to that of the states. Hence, in the election of the President, not only should Members of Parliament (MPs) play a part, but Members of the state legislative assemblies (MLAs) should also have a voice. Further, in relation to the centre, some members suggested that the college should comprise only members of the Lok Sabha since they are directly elected by the people. However, others argued that members of Rajya Sabha must be included as well since they are elected by members of directly elected state assemblies. Consequently, the Electoral College comprises all 776 MPs from both houses, and 4120 MLAs from all states. Note that MLCs of states with legislative councils are not part of the Electoral College.
Another aspect that was discussed by the Constituent Assembly was that of the balance of representation between the centre and the states in the Electoral College. The questions of how the votes of MPs and MLAs should be regarded, and if there should be a consideration of weightage of votes were raised. Eventually, it was decided that a ‘system of Proportional Representation’ would be adopted, and voting would be conducted according to the ‘single transferable vote system’.
Under the system of proportional representation, the total weightage of all MLA votes equals the total value of that of the MPs. However, the weightage of the votes of the MLAs varies on the basis of the population of their respective states. For example, the vote of an MLA from Uttar Pradesh would be given higher weightage than the vote of an MLA from a less populous state like Sikkim.
Under the single transferable vote system, every voter has one vote and can mark preferences against contesting candidates. To win the election, candidates need to secure a certain quota of votes. A detailed explanation of how this system plays out is captured in the infographic below.
Sources: Constitution of India; ECI Handbook; PRS.
Coming to the Presidential election to be held next month, the quota of votes required to be secured by the winning candidate is 5,49,452 votes. The distribution of the vote-share of various political parties as per their strength in Parliament and state assemblies looks like this:
Note that the last date for filing nominations is June 28th. In the next few days, political parties will be working across party lines to build consensus and secure the required votes for their projected candidates.
[The infographic on the process of elections was created by Jagriti Arora, currently an Intern at PRS.]
Several Rajya Sabha seats go to elections this year. The President and the Vice-President are also due to be elected by August. We analyse the impact of the recent State Assembly elections on the composition of the Rajya Sabha and the outcome of the Presidential polls. Rajya Sabha - How will its composition change? Since Rajya Sabha members are elected by the elected members of State Legislative Assemblies, a change in the composition of State Assemblies can affect the composition of Rajya Sabha. A total of 61 Rajya Sabha seats are up for election in April and July. This includes 10 seats from Uttar Pradesh and 1 seat from Uttarakhand. In light of the recent Assembly elections, we work out two scenarios to estimate the composition of Rajya Sabha in 2012. Members of Rajya Sabha are elected through the system of proportional representation by means of the Single Transferable Vote (STV). In an STV election, a candidate is required to achieve a certain minimum number of votes (called the 'quota') to be elected. (For more details on the STV system, click here) For instance, in the case of Uttar Pradesh (UP) 10 Rajya Sabha seats go to election this year. Candidates will be elected to these 10 seats by the 403 elected MLAs of the Uttar Pradesh State Assembly. Each MLA will rank the candidates based on his/ her preference. After successive rounds of elimination, candidates who are able to secure at least 37 {or 403/(10+1) } votes will be declared elected. In the new UP Assembly, Samajwadi Party (SP) has a total strength of 224 members. As a result, SP can elect at least 6 (or 224/37) Rajya Sabha MPs of its choice. BSP's strength of 80 will allow it to elect 2 (or 80/37) MPs to Rajya Sabha. Similarily, the BJP with a strength of 47 MLAs can have one candidate of its choice elected to the Rajya Sabha. This leaves 1 seat. The fate of this seat depends on the alliances that may be formed since no other party in UP has 37 or more seats in the Assembly. If the Congress (28 seats) and RLD (9 seats) join hands, they may be able to elect a candidate of their choice. We build two scenarios which give the likely range of seats for the major coalitions and parties. The actual result will likely fall between these scenarios, depending on alliances for each election. Of the two scenarios, Scenario II is better for the UPA. It is based on the assumption that the UPA is able to put together the necessary support/ alliances to get its candidates elected to seats with indeterminate status. Scenario I is based on the assumption that the UPA is not able to put together the required support. As a result, the seats in question get allocated to candidates from other parties/ coalitions. (See Notes for the composition of the coalitions) Composition of Rajya Sabha
| Party/ Coalition | Current composition | Scenario I | Scenario II |
| Total seats |
245 |
245 |
245 |
| UPA |
93 |
95 |
98 |
| NDA |
66 |
67 |
65 |
| Left |
19 |
14 |
14 |
| BSP |
18 |
15 |
15 |
| SP |
5 |
9 |
9 |
| BJD |
6 |
8 |
7 |
| AIADMK |
5 |
5 |
5 |
| Nominated |
7 |
12 |
12 |
| Others |
21 |
20 |
20 |
| Vacant |
5 |
0 |
0 |
It appears that there would not be a major change in the composition of the Rajya Sabha. Which party's candidate is likely to become the next President? The next Presidential election will be held in June or July. The electoral college for the Presidential election consists of the elected members of Lok Sabha, Rajya Sabha and all Legislative Assemblies. Each MP/ MLA’s vote has a pre-determined value based on the population they represent. For instance, an MP's vote has a value of 708, an MLA from UP has a vote value of 208 and an MLA from Sikkim has a vote value of 7. (Note that all MPs, irrespective of the constituency or State they represent, have equal vote value) As is evident, changes in the composition of Assemblies in larger States such as UP can have a major impact on the outcome of the Presidential election. The elections to the office of the President are held through the system of proportional representation by means of STV (same as in the case of Rajya Sabha). The winning candidate must secure at least 50% of the total value of votes polled. (For details, refer to this Election Commission document). By this calculation, a candidate will need at least 5,48,507 votes to be elected as the President. If the UPA were to vote as a consolidated block, its vote tally would reach 4,50,555 votes under Scenario II (the one that is favourable for the UPA). Therefore, the UPA will have to seek alliances if it wants a candidate of its choice to be elected to the office of the President. Scenarios for Presidential elections (figures represent the value of votes available with each party/ coalition)
| Party/ Coalition | Scenario I | Scenario II |
| UPA |
4,48,431 |
4,50,555 |
| NDA |
3,05,328 |
3,03,912 |
| Left |
51,574 |
51,574 |
| BSP |
43,723 |
43,723 |
| SP |
69,651 |
69,651 |
| BJD |
30,923 |
30,215 |
| AIADMK |
36,216 |
36,216 |
| Others |
1,11,166 |
1,11,166 |
| Total |
10,97,012 |
10,97,012 |
| Minimum required to be elected |
5,48,507 |
5,48,507 |
What about the Vice-President? Elections to the office of the Vice-President (VP) will be held in July or August. The electoral college will consist of all members of Lok Sabha and Rajya Sabha (i.e. both elected and nominated). Unlike the Presidential elections, all votes will have an equal value of one. Like the President, the VP is also elected through the system of proportional representation by means of STV. The winning candidate must secure at least 50% of the total value of votes polled. Presently, two seats are vacant in the Lok Sabha. If we exclude these from our analysis, we find that a candidate will need at least 395 votes to be elected as the VP. Under our best case scenario, the UPA holds 363 votes in the forthcoming VP elections. As is the case with Presidential elections, the UPA will have to seek alliances to get a candidate of its choice elected to the office of the Vice-President. Scenarios for VP elections (figures represent the value of votes available with each party/ coalition)
| Party/ Coalition |
Scenario I |
Scenario II |
| UPA |
360 |
363 |
| NDA |
216 |
214 |
| Left |
38 |
38 |
| BSP |
36 |
36 |
| SP |
31 |
31 |
| BJD |
22 |
21 |
| AIADMK |
14 |
14 |
| Nominated |
14 |
14 |
| Others |
57 |
57 |
| Total |
788 |
788 |
| Minimum required to be elected |
395 |
395 |
Notes: [1] UPA: Congress, Trinamool, DMK, NCP,Rashtriya Lok Dal, J&K National Conference, Muslim League Kerala State Committee, Kerala Congress (M), All India Majlis-e-Ittehadul Muslimeen, Sikkim Democratic Front, Praja Rajyam Party, Viduthalai Chiruthaigal Katchi [2] NDA: BJP, JD(U), Shiv Sena, Shiromani Akali Dal [3] Left: CPI(M), CPI, Revolutionary Socialist Party,All India Forward Bloc
