Applications for LAMP Fellowship 2025-26 are now open. Apply here. The last date for submitting applications is December 21, 2024
In a recent judgement, the Karnataka High Court upheld the disqualification of five independent MLAs from the Assembly. These MLAs, who had previously served as Ministers in the Yeddyurappa government, were disqualified along with 11 others after they withdrew their support to the government. The disqualifications raise some important questions on the working of the anti-defection law. While the law was framed in 1985 with the specific intent of 'combating the evil of political defections', over the years several unanticipated consequences have come to the fore. The primary among these is the erosion of independence of the average legislator. The need for an anti-defection law was first felt in the late 1960s. Of the 16 States that went to polls in 1967, Congress lost majority in eight and failed to form the government in seven. Thus began the era of common minimum programmes and coalition governments. This was accompanied with another development - the phenomenon of large scale political migrations. Within a brief span of 4 years (1967-71), there were 142 defections in Parliament and 1969 defections in State Assemblies across the country. Thirty-two governments collapsed and 212 defectors were rewarded with ministerial positions. Haryana was the first State where a Congress ministry was toppled. The Bhagwat Dayal ministry was defeated in the Assembly when its nominee for speakership lost out to another candidate. Congress dissidents defected to form a new party called the Haryana Congress, entered into an alliance with the opposition and formed a new government under the Chief Ministership of Rao Birender Singh (also a Congress defector). Haryana thus became the first State to reward a defector with Chief Ministership. Another Haryana legislator, Gaya Lal, defected thrice within a fortnight. The now well know terms 'Aya Ram' and 'Gaya Ram' that are often used to describe political turncoats owe inspiration to him. It was to address this issue that the anti-defection law was passed in 1985. This law amended the Constitution and added the Tenth Schedule to the same. The Supreme Court, in Kihota Hollohon vs. Zachilhu (1992), while upholding the validity of the law held that decisions of disqualification shall be open to judicial review. It also made some observations on Section 2(1) (b) of the Tenth schedule. Section 2(1) (b) reads that a member shall be disqualified if he votes or abstains from voting contrary to any direction issued by the political party. The judgement highlighted the need to limit disqualifications to votes crucial to the existence of the government and to matters integral to the electoral programme of the party, so as not to 'unduly impinge' on the freedom of speech of members. This anti-defection law has regulated parliamentary behaviour for over 25 years now. Though it has the advantage of providing stability to governments and ensuring loyalty to party manifestos, it reduces the accountability of the government to Parliament and curbs dissent against party policies. In this context, Manish Tewari's private member bill merits mention: he suggests that anti-defection law be restricted to votes of confidence and money bills. Such a move will retain the objective of maintaining the stability of the government while allowing MPs to vote freely (subject to the discipline of the party whip) on other issues. This brings us to the question - Is the anti-defection law indispensable? Is defection peculiar to India? If not, how do other countries handle similar situations? It is interesting to note that many advanced democracies face similar problems but haven't enacted any such laws to regulate legislators. Prominent cases in UK politics include the defection of Ramsay Macdonald, the first Labour Prime Minister, in 1931. He defected from his party following disagreements on policy responses to the economic crisis. Neither Macdonald nor any of his three cabinet colleagues who defected with him resigned their seats in the House of Commons to seek a fresh mandate. Australian Parliament too has had its share of defections. Legislators have often shifted loyalties and governments have been formed and toppled in quick succession. In the US too, Congressmen often vote against the party programme on important issues without actually defecting from the party. India might have its peculiar circumstances that merit different policies. But, the very fact that some other democracies can function without such a law should get us thinking. Sources/ Notes: [1] PRS Conference note: The Anti-Defection Law – Intent and Impact [2] Column by CV Madhukar (Director, PRS) titled 'Post-independents' in the Indian Express
The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.
In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.
What is the inflation targeting framework, and what happens if inflation is persistently high?
In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.
As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.
Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).
Figure 1: Consumer price index (year-on-year; in percentage)
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.
The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.
Breaking down the Consumer Price Index and the Wholesale Price Index
Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.
|
Table 1: Assigned weights for the calculation of CPI
Sources: MOSPI; PRS. |
Table 2: Average inflation of some CPI components
Sources: Database on Indian Economy, RBI; PRS. |
CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.
|
Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal. WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil. |
Table 3:Assigned weights for the
Sources: Ministry of Commerce and Industry; PRS. |
Why has WPI inflation been consistently above CPI inflation?
Movements in the WPI have an impact on the CPI. For almost a year and half, CPI inflation has remained below WPI inflation. However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag. This is because retail prices include taxes (as a percentage of price), while wholesale prices do not. Additionally, some of the goods in WPI act as inputs in the goods considered in CPI. An increase in input prices would lead to higher retail prices after a time lag.
We discuss possible reasons for why CPI has remained below WPI for a year and a half.
Figure 2: Consumer Price Index and Wholesale Price Index
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
Composition of indices
As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022. They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.
The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.
