Applications for LAMP Fellowship 2025-26 are now open. Apply here. The last date for submitting applications is December 21, 2024
In a recent judgement, the Karnataka High Court upheld the disqualification of five independent MLAs from the Assembly. These MLAs, who had previously served as Ministers in the Yeddyurappa government, were disqualified along with 11 others after they withdrew their support to the government. The disqualifications raise some important questions on the working of the anti-defection law. While the law was framed in 1985 with the specific intent of 'combating the evil of political defections', over the years several unanticipated consequences have come to the fore. The primary among these is the erosion of independence of the average legislator. The need for an anti-defection law was first felt in the late 1960s. Of the 16 States that went to polls in 1967, Congress lost majority in eight and failed to form the government in seven. Thus began the era of common minimum programmes and coalition governments. This was accompanied with another development - the phenomenon of large scale political migrations. Within a brief span of 4 years (1967-71), there were 142 defections in Parliament and 1969 defections in State Assemblies across the country. Thirty-two governments collapsed and 212 defectors were rewarded with ministerial positions. Haryana was the first State where a Congress ministry was toppled. The Bhagwat Dayal ministry was defeated in the Assembly when its nominee for speakership lost out to another candidate. Congress dissidents defected to form a new party called the Haryana Congress, entered into an alliance with the opposition and formed a new government under the Chief Ministership of Rao Birender Singh (also a Congress defector). Haryana thus became the first State to reward a defector with Chief Ministership. Another Haryana legislator, Gaya Lal, defected thrice within a fortnight. The now well know terms 'Aya Ram' and 'Gaya Ram' that are often used to describe political turncoats owe inspiration to him. It was to address this issue that the anti-defection law was passed in 1985. This law amended the Constitution and added the Tenth Schedule to the same. The Supreme Court, in Kihota Hollohon vs. Zachilhu (1992), while upholding the validity of the law held that decisions of disqualification shall be open to judicial review. It also made some observations on Section 2(1) (b) of the Tenth schedule. Section 2(1) (b) reads that a member shall be disqualified if he votes or abstains from voting contrary to any direction issued by the political party. The judgement highlighted the need to limit disqualifications to votes crucial to the existence of the government and to matters integral to the electoral programme of the party, so as not to 'unduly impinge' on the freedom of speech of members. This anti-defection law has regulated parliamentary behaviour for over 25 years now. Though it has the advantage of providing stability to governments and ensuring loyalty to party manifestos, it reduces the accountability of the government to Parliament and curbs dissent against party policies. In this context, Manish Tewari's private member bill merits mention: he suggests that anti-defection law be restricted to votes of confidence and money bills. Such a move will retain the objective of maintaining the stability of the government while allowing MPs to vote freely (subject to the discipline of the party whip) on other issues. This brings us to the question - Is the anti-defection law indispensable? Is defection peculiar to India? If not, how do other countries handle similar situations? It is interesting to note that many advanced democracies face similar problems but haven't enacted any such laws to regulate legislators. Prominent cases in UK politics include the defection of Ramsay Macdonald, the first Labour Prime Minister, in 1931. He defected from his party following disagreements on policy responses to the economic crisis. Neither Macdonald nor any of his three cabinet colleagues who defected with him resigned their seats in the House of Commons to seek a fresh mandate. Australian Parliament too has had its share of defections. Legislators have often shifted loyalties and governments have been formed and toppled in quick succession. In the US too, Congressmen often vote against the party programme on important issues without actually defecting from the party. India might have its peculiar circumstances that merit different policies. But, the very fact that some other democracies can function without such a law should get us thinking. Sources/ Notes: [1] PRS Conference note: The Anti-Defection Law – Intent and Impact [2] Column by CV Madhukar (Director, PRS) titled 'Post-independents' in the Indian Express
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
Method of calculation |
Recommendation and its status |
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.