Applications for the LAMP Fellowship 2025-26 will open soon. Sign up here to be notified when the dates are announced.

The following piece by C V Madhukar appeared in the September,2011 issue of Governance Now magazine. The debate in Parliament in response to the recent Anna Hazare led agitation demanding a strong Lok Pal Bill was a fine hour for the institution of Parliament.  What was even more important about the debate is that it was watched by thousands of people across the country many of whom have lost faith in the ability of our MPs to coherently articulate their point of view on substantive issues. Of course, in many cases some of these impressions about our MPs are largely formed by what the media channels tend to project, and without a full appreciation of what actually happens in Parliament.  There is now a greater awareness about an important institutional mechanism called the standing committee, and other nuances about the law making process. The Lok Pal agitation brought out another important aspect of our democracy.  There are still many in India who believe that peaceful protest is a powerful way to communicate the expectations of people to the government. Our elected representatives are prepared to respond collectively when such protests are held.  There is a negotiated settlement possible between the agitating citizens and our political establishment within the broad construct of our Constitution.  All of this means that the safety valves in our democracy are still somewhat functional, despite its many shortcomings. But the way the whole Lok Pal episode has played out so far raises a number of important questions about the functioning of our political parties and our Parliamentary system.  A fundamental question is the extent to which our elected MPs are able to ‘represent’ the concerns of the people in Parliament.  It has been obvious for some time now, that corruption at various levels has been a concern for many.  For months before the showdown in August, there have been public expressions of the disenchantment of the people about this problem.  Even though several MPs would say privately that it is time for them to do something about it as elected representatives, they were unable to come together in a way to show the people that they were serious about the issue, or that they could collectively do something significant about the problem.  The government was trying in its own way to grapple with the problem, and was unable to seize the initiative, expect for a last minute effort to find a graceful way out of the immediate problem on hand. In our governance system as outlined in our Constitution, the primary and most important institution to hold the government accountable is the Parliament.  To perform this role, the Parliament has a number of institutional mechanisms that have evolved over the years.  The creation of the CAG as a Constitutional body that provides inputs to Parliament, the Public Accounts Committee in Parliament, the question hour in Parliament are some of the ways in which the government is held to account.  Clearly all of these mechanisms together are unable to adequately do the work of overseeing the government that our MPs have been tasked with.  But it is one thing for our MPs to be effective in their role holding the government to account, and a very different thing to come across collectively as being responsive to the concerns of the people. For our MPs to play their representation role more convincingly and meaningfully there are certain issues that need to be addressed.  A major concern is about how our political parties are structured, where MPs are bound by tight party discipline. In a system where the party leadership decides who gets the party ticket to contest the next election, there is a natural incentive for MPs to toe the party line, even within their party forums.  This is often at the cost of their personal conviction about certain issues, and may sometimes be against what the citizens could want their representatives to do. Add to this the party whip system, under which each MP has to vote along the party line or face the risk of losing his seat in Parliament.  And then of course, if some MP decides to take a stand on some issue, he needs to do all the research work on his own because our elected representatives have no staff with this capability.  This deadly cocktail of negative incentives, just makes it very easy for the MP to mostly just follow the party line.  If the representation function were to be taken somewhat seriously, these issues need to be addressed. The 2004 World Development Report of the World Bank was focussed on accountability.  An important idea in the report was that it was too costly and inefficient for people to vote a government in and wait till the next election to hold the government accountable by voting it out for the poor governance it provides.  That is the reason it is essential for governments and citizens to develop ways in which processes can be developed by which the government can be held accountable even during its tenure. The myriad efforts by government such as social audits, monitoring and evaluation efforts within government departments, efforts by Parliament to hold the government accountable, efforts of civil society groups, are all ways of holding the government to account.  But over and above accountability, in an age of growing aspirations and increasing transparency, our MPs must find new ways of asserting their views and those people that they seek to represent in our Parliament.  This is an age which expects our politicians to be responsive, but in a responsible way. Even as the Lok Pal Bill is being deliberated upon in the standing committee, civil society groups continue to watch how MPs will come out on this Bill.  There are plenty of other opportunities where MPs and Parliament can take the initiative, including electoral reforms, funding of elections, black money, etc.  It remains to be seen whether our MPs will lead on these issues from the front, or will choose to be led by others. This will determine whether in the perception of the public the collective stock of our MPs will rise or continue to deplete in the months ahead.

Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts.  It had first recommended these names earlier this year and in August last year, but these appointments were not made.  The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts).  Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases.  As of today, more than four crore cases are pending across all courts in India.   In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.

High vacancy of judges across courts

Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges.  Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually.  However, vacancies persist due to insufficient appointments (see Figures 1 and 2).  Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts). 

Figure 1: Vacancy of judges in High Courts

Figure 2: Vacancy of judges in subordinate courts

image

image

Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS.

As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34).  Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098).  Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges.  In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3).  The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled. 

Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)

image

Source: Vacancy Statement, Department of Justice; PRS.

 

 

 

 

 

 

 

 

 

Appointments of High Court judges are guided by a memorandum of procedure.  As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs.  However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts.  Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court.  No timeline is prescribed for this stage of the appointment process.  In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.

As of today, over 3.6 crore cases are pending before subordinate courts in India.  As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts.  Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4).  Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.

For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.

Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)

image

Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS.

 

How many judges do we need?

The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary.  Lack of adequate number of judges means a greater workload per judge.  Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts.  Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1). 

Table 1: Methods recommended for calculating the required number of judges for subordinate courts

Method of calculation

Recommendation and its status

Judge-to-population ratio: optimum number of judges per million population

The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people.  This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002).  For 2020, the judge-to-population ratio was 21 judges per million population.     Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts.

Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge

The Law Commission of India (2014) proposed this method.  It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions.

Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions

The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method.     It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts.     In 2017, the Supreme Court accepted this model.

Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study

Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts.  It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court.  The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi.

Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.