Applications for the LAMP Fellowship 2025-26 will open soon. Sign up here to be notified when the dates are announced.
The 15th Lok Sabha is close to the end of its tenure. A key legislation that proposes major reforms in food security was listed for discussion in Parliament. The National Food Security Bill, 2011 has been scrutinised by a Standing Committee. In January, we compared the Standing Committee's recommendations with the provisions of the Bill. Since then, amendments to the Bill have been introduced in Parliament. Debates on the Bill have revolved around the method of delivering food security, the identification of beneficiaries and the financial implications of the Bill. Method of delivery The Bill aims to make the right to food a statutory right. It proposes to use the existing Public Distribution System (PDS) to deliver foodgrain to 75% of the rural and 50% of the urban population. However, the Bill also allows for cash transfers and food coupons in lieu of grains as mechanisms to deliver food security. While the PDS is known to suffer from leakages as high as 40%, cash transfers and food coupons are known to expose recipients to volatility and price inflation. Each method of delivery would have its own implications, financial and otherwise. The table below compares these methods of delivery.[i] [table id=7 /]
Identification The Bill does not universalise food entitlements. It classifies the population into two categories of beneficiaries, who shall be identified by the centre and states. Mechanisms that aim to target benefits to certain sections of the population have been prone to large inclusion and exclusion errors. A 2009 expert group study headed by N.C. Saxena that evaluated PDS, estimated that about 61% of the eligible population was excluded from the BPL list while 25% of APL households were included in the BPL list. Beneficiaries under the Food Security Bill will be identified through a similar process. It is unclear how these errors in identification of beneficiaries under the PDS will be addressed by the Bill. Financial implications - cost sharing between the centre and states A Bill that aims to deliver food security to a large section of the country would have significant financial implications. Costs shall be shared between the centre and states. Costs imposed on states (partial or full) include: nutritional support to pregnant women and lactating mothers, mid-day meals, anganwadi infrastructure, meals for children suffering from malnutrition, transport and delivery of foodgrains, creating and maintaining storage facilities, and costs associated with District Grievance Redressal Officers and State Food Commissions. Although the centre shall provide some assistance, states will have to bear a significant financial burden on account of implementation. It is unclear whether Parliament can require states to allocate funds without encroaching on the powers of state legislative assemblies. If a state chooses not to allocate the necessary funds or does not possess the funds to do so, implementation of the Bill could be seriously affected. The Standing Committee examining the Bill had recommended that an independent body, such as the Finance Commission, should be consulted regarding additional funds to be borne by states. The Right to Education Act with similar centre-state sharing of funds provides for such a consultation with the Finance Commission. Cost of implementation of the Bill Another contentious issue is the cost of implementing the Bill. The Bill estimates the cost at Rs 95,000 crore. However, experts have made varying estimates on the costs ranging from Rs 2 lakh crore to Rs 3.5 lakh crore. Ashok Gulati, Chairman of the Commission for Agricultural Costs and Prices, estimated the cost at 2 lakh crore per year whereas the Minister of Food, K.V. Thomas was reported to have estimated the cost at Rs 3.5 lakh crore. The passage of the food security Bill in Parliament will depend on the ability of the government to build consensus on these issues. It remains to be seen how the Bill is debated next Parliament session.
[i] Kapur D., Mukhopadhyay P., and A. Subramanian. “The Case for Direct Cash Transfers to the Poor.” Economic and Political Weekly. Vol 43, No 15 (Apr 12-18, 2008). Khera, R. “Revival of the Public Distribution System: Evidence and Explanations.” Economic and Political Weekly. Vol XLVI, Nos 44 & 45 (Nov 5, 2011). Shah, M. “Direct Cash Transfers: No Magic Bullet.” Economic and Political Weekly. Vol 43, No 34, pp. 77-79 (Aug 23-29, 2008).
The counting of votes for General Election 2019, which concluded on Sunday, will begin tomorrow, i.e., 23rd May at 8 AM. The election was conducted in 7 phases for 543 constituencies of Lok Sabha. The Election Commission of India (ECI) uses Electronic Voting Machines (EVM) to conduct elections. Since 2000, ECI has conducted 113 assembly elections and three general elections using EVMs.[1] Voter Verified Paper Audit Trail (VVPAT) system was added to EVMs in 2013 to increase transparency and improve voter confidence in the system. The VVPAT system generates a printed paper slip bearing the name and election symbol of the candidate. On April 8, 2019, Supreme Court instructed the ECI that printed VVPAT slips from randomly selected five polling stations in each assembly segment of a parliamentary constituency should be matched with EVMs.[2] In this blog, we explain the election counting process in India.
Who is responsible for counting the votes?
The Returning Officer (RO) is responsible for conducting elections in a constituency, which also includes counting of votes.[3] The RO is an officer of the government or a local authority nominated by the ECI for each constituency in consultation with the state government.[4]
Where does the counting take place?
The RO decides the place where the votes will be counted for the parliamentary constituency. The date and time of counting is fixed by the ECI. Ideally counting of votes for a constituency should be done at one place, preferably at the Headquarter of the RO in that constituency. It should be performed under the direct supervision of the RO. However, each Parliamentary Constituency has multiple assembly segments. In this situation, counting can take place at different locations for various assembly segments under the direct supervision of an Assistant Returning Officer (ARO).
Layout of the Counting Hall
Page 431, Handbook for Returning Officer Document 23 Edition 1, Election Commission of India
Counting of votes for each assembly segment of a parliamentary constituency is performed in a single hall. In each round of counting, votes from 14 EVMs are counted. In case of simultaneous parliamentary and assembly elections, such as Odisha, the first seven tables are used for counting votes for assembly elections, and the rest for parliamentary elections.
In constituencies with a large number of candidates, it may not be possible to count votes for all candidates in a single hall without overcrowding it. In such a situation, the number of counting halls or tables can be increased with the prior permission of the ECI. A hall can also be used for counting votes of another assembly segment after the results of the first segment are declared. However, counting may be done for only one assembly segment in a hall at any point of time.
What is the counting process?
Counting is performed by counting supervisors appointed by the RO. Counting staff is appointed through a three stage randomisation process to ensure impartiality. Candidates along with their counting agents and election agents are also present in the counting hall.
Counting of votes begins with Electronically Transmitted Postal Ballots (ETPB) and Postal Ballots (PB). These votes are counted under the direct supervision of the RO. Counting of EVMs can start 30 minutes after the commencement of PB counting, even if all PBs have not been counted. At the end of each round of counting, the results from 14 EVMs are declared.
What is the process for counting VVPAT slips?
The ECI prescribes the process for randomly selecting one EVM for each assembly segment of a parliamentary constituency for VVPAT matching. The verification of VVPAT paper slips is conducted inside a secured VVPAT Counting Booth in the counting hall with access to authorised personnel only. Any counting table in the hall can be converted into VVPAT Counting Booth after completing EVM vote counting. Parliamentary constituencies generally have between five and ten assembly segments.
The Supreme Court has decided that VVPAT slips of five randomly selected polling stations for each assembly segment shall be matched with the result shown in the respective EVMs. This implies that VVPAT paper slips need to be matched for about 25-50 machines for each parliamentary constituency. This process requires personal supervision of RO/ARO. The ECI has decided that the counting of five VVPATs will be done sequentially.[5] The RO can declare the final result for the constituency after the VVPAT matching process has been completed.
What happens if there is a discrepancy between the VVPAT count and the EVM results?
In such a case, the printed paper slips count is taken as final. The ECI has not clarified whether there would be any further action (such as counting of all VVPATs in a constituency or assembly segment) if there is a discrepancy in the counts of one of the five VVPATs.
[1] https://www.eci.gov.in/files/file/8756-status-paper-on-evm-edition-3/.
[2] N Chandrababu Naidu and Ors. v. Union of India and Anr WP(C). 273/2019 decided on April 8, 2019.
[3] https://www.eci.gov.in/files/file/9400-hand-book-for-returning-officer-february-2019/.
[4] https://www.eci.gov.in/faqs/elections/election-machinery/faqs-election-machinery-r1/.
[5] https://www.eci.gov.in/files/file/10197-mandatory-verification-of-vvpat-paper-slips-regarding/.
