Applications for the LAMP Fellowship 2025-26 will open soon. Sign up here to be notified when the dates are announced.
The 15th Lok Sabha is close to the end of its tenure. A key legislation that proposes major reforms in food security was listed for discussion in Parliament. The National Food Security Bill, 2011 has been scrutinised by a Standing Committee. In January, we compared the Standing Committee's recommendations with the provisions of the Bill. Since then, amendments to the Bill have been introduced in Parliament. Debates on the Bill have revolved around the method of delivering food security, the identification of beneficiaries and the financial implications of the Bill. Method of delivery The Bill aims to make the right to food a statutory right. It proposes to use the existing Public Distribution System (PDS) to deliver foodgrain to 75% of the rural and 50% of the urban population. However, the Bill also allows for cash transfers and food coupons in lieu of grains as mechanisms to deliver food security. While the PDS is known to suffer from leakages as high as 40%, cash transfers and food coupons are known to expose recipients to volatility and price inflation. Each method of delivery would have its own implications, financial and otherwise. The table below compares these methods of delivery.[i] [table id=7 /]
Identification The Bill does not universalise food entitlements. It classifies the population into two categories of beneficiaries, who shall be identified by the centre and states. Mechanisms that aim to target benefits to certain sections of the population have been prone to large inclusion and exclusion errors. A 2009 expert group study headed by N.C. Saxena that evaluated PDS, estimated that about 61% of the eligible population was excluded from the BPL list while 25% of APL households were included in the BPL list. Beneficiaries under the Food Security Bill will be identified through a similar process. It is unclear how these errors in identification of beneficiaries under the PDS will be addressed by the Bill. Financial implications - cost sharing between the centre and states A Bill that aims to deliver food security to a large section of the country would have significant financial implications. Costs shall be shared between the centre and states. Costs imposed on states (partial or full) include: nutritional support to pregnant women and lactating mothers, mid-day meals, anganwadi infrastructure, meals for children suffering from malnutrition, transport and delivery of foodgrains, creating and maintaining storage facilities, and costs associated with District Grievance Redressal Officers and State Food Commissions. Although the centre shall provide some assistance, states will have to bear a significant financial burden on account of implementation. It is unclear whether Parliament can require states to allocate funds without encroaching on the powers of state legislative assemblies. If a state chooses not to allocate the necessary funds or does not possess the funds to do so, implementation of the Bill could be seriously affected. The Standing Committee examining the Bill had recommended that an independent body, such as the Finance Commission, should be consulted regarding additional funds to be borne by states. The Right to Education Act with similar centre-state sharing of funds provides for such a consultation with the Finance Commission. Cost of implementation of the Bill Another contentious issue is the cost of implementing the Bill. The Bill estimates the cost at Rs 95,000 crore. However, experts have made varying estimates on the costs ranging from Rs 2 lakh crore to Rs 3.5 lakh crore. Ashok Gulati, Chairman of the Commission for Agricultural Costs and Prices, estimated the cost at 2 lakh crore per year whereas the Minister of Food, K.V. Thomas was reported to have estimated the cost at Rs 3.5 lakh crore. The passage of the food security Bill in Parliament will depend on the ability of the government to build consensus on these issues. It remains to be seen how the Bill is debated next Parliament session.
[i] Kapur D., Mukhopadhyay P., and A. Subramanian. “The Case for Direct Cash Transfers to the Poor.” Economic and Political Weekly. Vol 43, No 15 (Apr 12-18, 2008). Khera, R. “Revival of the Public Distribution System: Evidence and Explanations.” Economic and Political Weekly. Vol XLVI, Nos 44 & 45 (Nov 5, 2011). Shah, M. “Direct Cash Transfers: No Magic Bullet.” Economic and Political Weekly. Vol 43, No 34, pp. 77-79 (Aug 23-29, 2008).
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
Method of calculation |
Recommendation and its status |
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.