Applications for LAMP Fellowship 2025-26 are now open. Apply here. The last date for submitting applications is December 21, 2024

As the dust settles around the 16th Lok Sabha, attention must now shift to the state assemblies, some of which have been newly constituted like Rajasthan, Chhattisgarh, Madhya Pradesh, Odisha, Andhra Pradesh and the few that will go into elections in the next few months like Maharashtra and Haryana. There are 30 state legislative assemblies not including the newly formed state of Seemandhara. In our federal structure, laws framed by the state assemblies are no less important and deserve the same diligence and debate as laws made by Parliament. A brief look in to the performance of some of our state assemblies reveals that these institutions which form the cornerstones of our democracy need some serious attention. State Assemblies: business hours The current Haryana Legislative Assembly that comes to the end of its five year term in October this year has held 10 sessions since 2009 till March 2014, meeting for a total of 54 days – an average of 11 days per year. In comparison, the Lok Sabha sat for an average of 69 days each year from 2009 to 2014. Among state assemblies, only Nagaland and Arunachal Pradesh sat for fewer days than Haryana. In the same period the Kerala Assembly sat for an average of 50 days per year, while Tamil Nadu Assembly sat for 44 days. In its previous term, the Gujarat Legislative Assembly sat for a total of 157 days – an average of 31 days each year. Similarly, the current Goa Legislative Assembly sat for 24 days in 2012 and for 39 days in 2013. Over the last 10 years, the Assembly sat for an average of 26 days a year.  It recorded the highest number of sitting days in the last 10 years, at 39 days. Law making in the states In most states, Bills are passed with little or no discussion. Most Bills are introduced and passed on the last day of each session, which gives Members hardly any opportunity to examine or discuss legislation in detail. Unlike Parliament, where most Bills are referred to a department related standing committee which studies the Bill in greater detail, in most states such committees are non-existent.  The exceptions are Kerala which has constituted subject committees for this purpose and states like Goa and Himachal Pradesh where Select Committees are constituted for important Bills. The current Haryana Assembly has passed 129 Bills, all of which were passed on the same day as they were introduced. Upto 23 Bills were passed on a single day, which left hardly any time for substantial discussion. In the twelfth Gujarat Assembly, over 90% of all Bills were passed on the same day as they were introduced. In the Budget Session of 2011, 31 Bills were passed of which 21 were introduced and passed within three sitting days. Of the 40 Bills passed by the Goa Assembly till May 2013, three Bills were referred to Select Committees. Excluding Appropriation Bills, the Assembly passed 32 Bills, which were taken up together for discussion and passing in five days. Almost all Bills were passed within three days of introduction. On average, each Bill was discussed for four minutes. In 2012, the West Bengal Legislative Assembly passed a total of 39 Bills, including Appropriation Bills.  Most Bills were passed on the same day they were introduced in the Assembly.  In 2011, a total of 23 Bills were passed. On average, five Members participated in the discussions on each Bill. In 2012, the Delhi Legislative Assembly passed 11 Bills. Only one of the 11 Bills was discussed for more than 10 minutes. The performance of the Chhattisgarh and Bihar Vidhan Sabhas follow the same pattern. Over the last few years, some assemblies such as Andhra Pradesh, Rajasthan and Haryana have taken some positive steps which include setting up subject committees and permitting live telecast of Assembly proceedings. Every legislator- in Parliament and the states - is accountable to his voter. Weak democratic institutions deprive legislators of their right to oversee the government as enshrined in the Constitution. Inadequate number of sitting days, lack of discussion on Bills, and passing of the Budget and demands for grants without discussion are symptoms of institutional ennui and do not do justice to the enormous import of these legislative bodies. Serious thought and public debate is needed to reinvigorate these ‘temples of democracy’ and provide elected representatives with the opportunity to exercise their right to legislative scrutiny, hold government to account, and represent their constituents.

The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.

In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.   

What is the inflation targeting framework, and what happens if inflation is persistently high?

In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.

As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.  

Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).

Figure 1: Consumer price index (year-on-year; in percentage)

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.   

The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.

Breaking down the Consumer Price Index and the Wholesale Price Index

Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.

Table 1: Assigned weights for the calculation of CPI

Category

Weight

Food and beverages

46%

Miscellaneous (including petrol and diesel, health, and education)

28%

Housing

10%

Clothing and footwear

7%

Fuel and light

7%

Pan, tobacco, and intoxications

2%

Total

100%

Sources: MOSPI; PRS.

Table 2: Average inflation of some CPI components
between February 2022 to August 2022 (in percentage)

Subcategory of CPI

Average inflation

Vegetables 

13.26%

Oils and fats

12.46%

Footwear

11.41%

Fuel and Light

9.88%

Transport and communication

7.74%

Cereals and products

6.05%

Sources: Database on Indian Economy, RBI; PRS.

CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.   

Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal.  WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil.

Table 3:Assigned weights for the
calculation of WPI (in percentage)

Category

Weight

Manufactured products

64%

Primary articles

23%

Fuel and power

12%

All commodities

100%

Sources: Ministry of Commerce and Industry; PRS.

Why has WPI inflation been consistently above CPI inflation?

Movements in the WPI have an impact on the CPI.  For almost a year and half, CPI inflation has remained below WPI inflation.  However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag.  This is because retail prices include taxes (as a percentage of price), while wholesale prices do not.  Additionally, some of the goods in WPI act as inputs in the goods considered in CPI.  An increase in input prices would lead to higher retail prices after a time lag.

We discuss possible reasons for why CPI has remained below WPI for a year and a half.

Figure 2: Consumer Price Index and Wholesale Price Index

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

Composition of indices

As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022.  They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.

The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.