Applications for the LAMP Fellowship 2025-26 will open soon. Sign up here to be notified when the dates are announced.
Recently, the Kelkar Committee published a roadmap for fiscal consolidation. The report stresses the need and urgency to address India’s fiscal deficit. A high fiscal deficit – the excess of government expenditure over receipts – can be problematic for many reasons. The fiscal deficit is financed by government borrowing; increased borrowing can crowd out funds available for private investment. High government spending can also lead to a rise in price levels. A full PRS summary of the report can be found here. Recent fiscal trends Last year (2011-12), the central government posted a fiscal deficit of 5.8% (of GDP), significantly higher than the targeted 4.6%. This is in stark contrast to five years ago in 2007-08, when after embarking on a path of fiscal consolidation the government’s fiscal deficit had shrunk to a 30 year low of 2.5%. In 2008-09, a combination of the Sixth Pay Commission, farmers’ debt waiver and a crisis-driven stimulus led to the deficit rising to 6% and it has not returned to those levels since. As of August this year, government accounts reveal a fiscal deficit of Rs 3,37,538 crore which is 65.7% of the targeted deficit with seven months to go in the fiscal year. With growth slowing this year, the committee expects tax receipts to fall short of expectations significantly and expenditure to overshoot budget estimates, leaving the economy on the edge of a “fiscal precipice”.
Figure 1 (source: RBI)
Committee recommendations - expenditure To tackle the deficit on the expenditure side, the committee wants to ease the subsidy burden. Subsidy expenditure, as a percentage of GDP, has crept up in the last two years (see Figure 2) and the committee expects it to reach 2.6% of GDP in 2012-13. In response, the committee calls for an immediate increase in the price of diesel, kerosene and LPG. The committee also recommends phasing out the subsidy on diesel and LPG by 2014-15. Initial reports suggest that the government may not support this phasing out of subsidies.
Figure 2 (source: RBI, Union Budget documents, PRS)
For the fertiliser subsidy, the committee recommends implementing the Department of Fertilisers proposal of a 10% price increase on urea. Last week , the government raised the price of urea by Rs 50 per tonne (a 0.9% increase). Finally, the committee explains the rising food subsidy expenditure as a mismatch between the issue price and the minimum support price and wants this to be addressed. Committee recommendations - receipts Rising subsidies have not been matched by a significant increase in receipts through taxation: gross tax revenue as a percentage of GDP has remained around 10% of GDP (see Figure 3). The committee seeks to improve collections in both direct and indirect taxes via better tax administration. Over the last decade, income from direct taxes – the tax on income – has emerged as the biggest contributor to the Indian exchequer. The committee feels that the pending Direct Tax Code Bill would result in significant losses and should be reviewed. To boost income from indirect taxes – the tax on goods and services – the committee wants the proposed Goods and Service Tax regime to be implemented as soon as possible.
Figure 3 (source: RBI)
Increasing disinvestment, the process of selling government stake in public enterprises, is another proposal to boost receipts. India has failed to meet the disinvestment estimate set out in the Budget in the last two years (Figure 4). The committee believes introducing new channels [1. The committee suggests introducing a ‘call option model’. This is a mechanism allowing the government to offer for sale multiple securities over a period of time till disinvestment targets are achieved. Investors would have the option to purchase securities at the cost of a premium. They also propose introducing ‘exchange traded funds’ which would comprise all listed securities of Central Public Sector Enterprises and would provide investors with the benefits of diversification, low cost access and flexibility.] for disinvestment would ensure that disinvestment receipts would meet this year’s target of Rs 30,000 crore.
Figure 4 (source: Union Budget documents, PRS)
Taken together, these policy changes, the committee believe would significantly improve India’s fiscal health and boost growth. Their final projections for 2012-13, in both a reform and no reform scenario, and the medium term (2013-14 and 2014-15) are presented in the table below: [table id=2 /]
The counting of votes for General Election 2019, which concluded on Sunday, will begin tomorrow, i.e., 23rd May at 8 AM. The election was conducted in 7 phases for 543 constituencies of Lok Sabha. The Election Commission of India (ECI) uses Electronic Voting Machines (EVM) to conduct elections. Since 2000, ECI has conducted 113 assembly elections and three general elections using EVMs.[1] Voter Verified Paper Audit Trail (VVPAT) system was added to EVMs in 2013 to increase transparency and improve voter confidence in the system. The VVPAT system generates a printed paper slip bearing the name and election symbol of the candidate. On April 8, 2019, Supreme Court instructed the ECI that printed VVPAT slips from randomly selected five polling stations in each assembly segment of a parliamentary constituency should be matched with EVMs.[2] In this blog, we explain the election counting process in India.
Who is responsible for counting the votes?
The Returning Officer (RO) is responsible for conducting elections in a constituency, which also includes counting of votes.[3] The RO is an officer of the government or a local authority nominated by the ECI for each constituency in consultation with the state government.[4]
Where does the counting take place?
The RO decides the place where the votes will be counted for the parliamentary constituency. The date and time of counting is fixed by the ECI. Ideally counting of votes for a constituency should be done at one place, preferably at the Headquarter of the RO in that constituency. It should be performed under the direct supervision of the RO. However, each Parliamentary Constituency has multiple assembly segments. In this situation, counting can take place at different locations for various assembly segments under the direct supervision of an Assistant Returning Officer (ARO).
Layout of the Counting Hall
Page 431, Handbook for Returning Officer Document 23 Edition 1, Election Commission of India
Counting of votes for each assembly segment of a parliamentary constituency is performed in a single hall. In each round of counting, votes from 14 EVMs are counted. In case of simultaneous parliamentary and assembly elections, such as Odisha, the first seven tables are used for counting votes for assembly elections, and the rest for parliamentary elections.
In constituencies with a large number of candidates, it may not be possible to count votes for all candidates in a single hall without overcrowding it. In such a situation, the number of counting halls or tables can be increased with the prior permission of the ECI. A hall can also be used for counting votes of another assembly segment after the results of the first segment are declared. However, counting may be done for only one assembly segment in a hall at any point of time.
What is the counting process?
Counting is performed by counting supervisors appointed by the RO. Counting staff is appointed through a three stage randomisation process to ensure impartiality. Candidates along with their counting agents and election agents are also present in the counting hall.
Counting of votes begins with Electronically Transmitted Postal Ballots (ETPB) and Postal Ballots (PB). These votes are counted under the direct supervision of the RO. Counting of EVMs can start 30 minutes after the commencement of PB counting, even if all PBs have not been counted. At the end of each round of counting, the results from 14 EVMs are declared.
What is the process for counting VVPAT slips?
The ECI prescribes the process for randomly selecting one EVM for each assembly segment of a parliamentary constituency for VVPAT matching. The verification of VVPAT paper slips is conducted inside a secured VVPAT Counting Booth in the counting hall with access to authorised personnel only. Any counting table in the hall can be converted into VVPAT Counting Booth after completing EVM vote counting. Parliamentary constituencies generally have between five and ten assembly segments.
The Supreme Court has decided that VVPAT slips of five randomly selected polling stations for each assembly segment shall be matched with the result shown in the respective EVMs. This implies that VVPAT paper slips need to be matched for about 25-50 machines for each parliamentary constituency. This process requires personal supervision of RO/ARO. The ECI has decided that the counting of five VVPATs will be done sequentially.[5] The RO can declare the final result for the constituency after the VVPAT matching process has been completed.
What happens if there is a discrepancy between the VVPAT count and the EVM results?
In such a case, the printed paper slips count is taken as final. The ECI has not clarified whether there would be any further action (such as counting of all VVPATs in a constituency or assembly segment) if there is a discrepancy in the counts of one of the five VVPATs.
[1] https://www.eci.gov.in/files/file/8756-status-paper-on-evm-edition-3/.
[2] N Chandrababu Naidu and Ors. v. Union of India and Anr WP(C). 273/2019 decided on April 8, 2019.
[3] https://www.eci.gov.in/files/file/9400-hand-book-for-returning-officer-february-2019/.
[4] https://www.eci.gov.in/faqs/elections/election-machinery/faqs-election-machinery-r1/.
[5] https://www.eci.gov.in/files/file/10197-mandatory-verification-of-vvpat-paper-slips-regarding/.
