Finances of the Railways were presented along with the Union Budget on February 1, 2018 (the Railways Budget was merged with the Union Budget last year).  In the current Budget Session, Lok Sabha is scheduled to discuss the allocation to the Ministry of Railways.  In light of this, we discuss Railways’ finances, and issues that the transporter has been facing with regard to financing.

What are the different sources of revenue for Railways?

Indian Railways has three primary sources of revenue: (i) its own internal resources (revenue from freight and passenger traffic, leasing of railway land, etc.), (ii) budgetary support from the central government, and (iii) extra budgetary resources (such as market borrowings, institutional financing).

Figure 1Railways’ internal revenue for 2018-19 is estimated at Rs 2,01,090 crore which is 7% higher than the revised estimates of 2017-18.  Majority of this revenue comes from traffic (both freight and passenger), and is estimated at Rs 2,00,840 crore.  In the last few years, Railways has been struggling to run its transportation business, and generate its own revenue.  The growth rate of Railways’ earnings from its core business of running freight and passenger trains has been declining.  This is due to a decline in the growth of both freight and passenger traffic (see Figure 1).  Railways is also slowly losing traffic share to other modes of transport such as roads and airlines.  The share of Railways in total freight traffic has declined from 89% in 1950-51 to 30% in 2011-12.

 

The Committee on Restructuring Railways (2015) had observed that raising revenue for Railways is a challenge because: (i) investment is made in projects that do not have traffic and hence do not generate revenue, (ii) the efficiency improvements do not result in increasing revenue, and (iii) delays in projects results in cost escalation, which makes it difficult to recover costs.  Railways also provides passenger fares that are heavily subsidised, which results in the passenger business facing losses of around Rs 33,000 crore in a year (in 2014-15).  Passenger fares are also cross-subsidised by charging higher rates for freight.  The consequence is that freight rates have been increasing which has resulted in freight traffic moving towards roads.

Figure 2Figure 2 shows the trends in capital outlay over the last decade.  A decline in internal revenue generation has meant that Railways funds its capital expenditure through budgetary support from the central government and external borrowings.  While the support from central government has mostly remained consistent, Railways’ borrowings have been increasing.  Various committees have noted that an increased reliance on borrowings will further exacerbate the financial situation of Railways.

The total proposed capital outlay (or capital expenditure) for 2018-19 is Rs 1,48,528 crore which is a 24% increase from the 2017-18 revised estimates (Rs 1,20,000 crore).  Majority of this capital expenditure will be financed through borrowings (55%), followed by the budgetary support from the central government (37%).  Railways will fund only 8% of its capital expenditure from its own internal resources.

How can Railways raise more money?

The Committee on Restructuring Railways had suggested that Railways can raise more revenue through private participation in the following ways: (i) service and management contracts, (ii) leasing to and from the private sector, (iii) joint ventures, and (iv) private ownership.  However, private participation in Railways has been muted as compared to other sectors such as roads, and airports.

Figure 3One of the key reasons for the failure of private participation in Railways is that policy making, the regulatory function, and operations are all vested within the same organisation, that is, the Ministry of Railways.  Railways’ monopoly also discourages private sector entry into the market.  The Committee on Restructuring Railways had recommended that the three roles must be separated from each other.  It had also recommended setting up an independent regulator for the sector.  The regulator will monitor whether tariffs are market determined and competitive.

Where does Railways spend its money?

The total expenditure for 2018-19 is projected at Rs 1,88,100 crore, which is 4% higher than 2017-18.  Staff wages and pension together comprise more than half of the Railways’ expenditure.  For 2018-19, the expenditure on staff is estimated at Rs 76,452 crore.  Allocation to the Pension Fund is estimated at Rs 47,600 crore.  These constitute about 66% of the Railways’ expenditure in 2018-19.

Railways’ primary expenditure, which is towards the payment of salaries and pension, has been gradually increasing (with a jump of around 15% each year in 2016-17 and 2017-18 due to implementation of the Seventh Pay Commission recommendations).  Further, the pension bill is expected to increase further in the years to come, as about 40% of the Railways staff was above the age of 50 years in 2016-17.

The Committee on Restructuring Railways (2015) had observed that the expenditure on staff is extremely high and unmanageable.  This expense is not under the control of Railways and keeps increasing with each Pay Commission revision.  It has also been observed that employee costs (including pensions) is one of the key components that reduces Railways’ ability to generate surplus, and allocate resources towards operations.

What is the allocation towards depreciation of assets?

Railways maintains a Depreciation Reserve Fund (DRF) to finance the costs of new assets replacing the old ones.  In 2018-19, appropriation to the DRF is estimated at Rs 500 crore, 90% lower than 2017-18 (Rs 5,000 crore).  In the last few years, appropriation to the DRF has decreased significantly from Rs 7,775 crore in 2014-15 to Rs 5,000 crore last year.  Provisioning Rs 500 crore towards depreciation might be an extremely small amount considering the scale of infrastructure managed by the Indian Railways, and the requirement to replace old assets to ensure safety.

The Standing Committee on Railways (2015) had observed that appropriation to the DRF is the residual amount after appropriation to the Pension Fund, instead of the actual requirement for maintenance of assets.  Under-provisioning for the DRF has also been observed as one of the reasons behind the decline in track renewals, and procurement of wagons and coaches.

Is there any provision towards safety?

Last year, the Rashtriya Rail Sanraksha Kosh was created to provide for passenger safety.  It was to have a corpus of one lakh crore rupees over a period of five years (Rs 20,000 crore per year).  The central government was to provide a seed amount of Rs 1,000 crore, and the remaining amount would be raised by the Railways from their own revenues or other sources.

As per the revised estimates of 2017-18, no money was allocated towards this fund.  In 2018-19, Rs 5,000 crore has been allocated for it.  With the Railways struggling to meet its expenditure and declining internal revenues, it is unclear how Railways will fund the remaining amount of Rs 95,000 crore for the Rail Sanraksha Kosh.

What happened to the dividend that was waived off last year?

Railways used to pay a return on the budgetary support it received from the government every year, known as dividend.  The rate of this dividend was about 5% in 2015-16.  From 2016-17, the requirement of paying dividend was waived off.  The last dividend amount paid was Rs 8,722 crore in 2015-16.

The Standing Committee on Railways (2017) had noted that part of the benefit from dividend is being utilised to meet the shortfall in the traffic earnings of Railways.  This defeats the purpose of removing the dividend liabilities since they are not being utilised in creating assets or increasing the net revenue of Railways.

The counting of votes for General Election 2019, which concluded on Sunday, will begin tomorrow, i.e., 23rd May at 8 AM.  The election was conducted in 7 phases for 543 constituencies of Lok Sabha.  The Election Commission of India (ECI) uses Electronic Voting Machines (EVM) to conduct elections. Since 2000, ECI has conducted 113 assembly elections and three general elections using EVMs.[1]  Voter Verified Paper Audit Trail (VVPAT) system was added to EVMs in 2013 to increase transparency and improve voter confidence in the system.  The VVPAT system generates a printed paper slip bearing the name and election symbol of the candidate.  On April 8, 2019, Supreme Court instructed the ECI that printed VVPAT slips from randomly selected five polling stations in each assembly segment of a parliamentary constituency should be matched with EVMs.[2]  In this blog, we explain the election counting process in India.

Who is responsible for counting the votes?

The Returning Officer (RO) is responsible for conducting elections in a constituency, which also includes counting of votes.[3] The RO is an officer of the government or a local authority nominated by the ECI for each constituency in consultation with the state government.[4]

Where does the counting take place?

The RO decides the place where the votes will be counted for the parliamentary constituency.  The date and time of counting is fixed by the ECI.  Ideally counting of votes for a constituency should be done at one place, preferably at the Headquarter of the RO in that constituency.  It should be performed under the direct supervision of the RO.  However, each Parliamentary Constituency has multiple assembly segments.  In this situation, counting can take place at different locations for various assembly segments under the direct supervision of an Assistant Returning Officer (ARO).

Layout of the Counting Hall

Page 431, Handbook for Returning Officer Document 23 Edition 1, Election Commission of India

Counting of votes for each assembly segment of a parliamentary constituency is performed in a single hall.  In each round of counting, votes from 14 EVMs are counted.  In case of simultaneous parliamentary and assembly elections, such as Odisha, the first seven tables are used for counting votes for assembly elections, and the rest for parliamentary elections.

In constituencies with a large number of candidates, it may not be possible to count votes for all candidates in a single hall without overcrowding it.  In such a situation, the number of counting halls or tables can be increased with the prior permission of the ECI.  A hall can also be used for counting votes of another assembly segment after the results of the first segment are declared.  However, counting may be done for only one assembly segment in a hall at any point of time.

What is the counting process?

Counting is performed by counting supervisors appointed by the RO.  Counting staff is appointed through a three stage randomisation process to ensure impartiality.  Candidates along with their counting agents and election agents are also present in the counting hall.

Counting of votes begins with Electronically Transmitted Postal Ballots (ETPB) and Postal Ballots (PB). These votes are counted under the direct supervision of the RO. Counting of EVMs can start 30 minutes after the commencement of PB counting, even if all PBs have not been counted.  At the end of each round of counting, the results from 14 EVMs are declared.

What is the process for counting VVPAT slips?

The ECI prescribes the process for randomly selecting one EVM for each assembly segment of a parliamentary constituency for VVPAT matching.  The verification of VVPAT paper slips is conducted inside a secured VVPAT Counting Booth in the counting hall with access to authorised personnel only.  Any counting table in the hall can be converted into VVPAT Counting Booth after completing EVM vote counting.  Parliamentary constituencies generally have between five and ten assembly segments.

The Supreme Court has decided that VVPAT slips of five randomly selected polling stations for each assembly segment shall be matched with the result shown in the respective EVMs.  This implies that VVPAT paper slips need to be matched for about 25-50 machines for each parliamentary constituency.  This process requires personal supervision of RO/ARO.  The ECI has decided that the counting of five VVPATs will be done sequentially.[5]  The RO can declare the final result for the constituency after the VVPAT matching process has been completed.

What happens if there is a discrepancy between the VVPAT count and the EVM results?

In such a case, the printed paper slips count is taken as final. The ECI has not clarified whether there would be any further action (such as counting of all VVPATs in a constituency or assembly segment) if there is a discrepancy in the counts of one of the five VVPATs.

[1] https://www.eci.gov.in/files/file/8756-status-paper-on-evm-edition-3/.

[2] N Chandrababu Naidu and Ors. v. Union of India and Anr WP(C). 273/2019 decided on April 8, 2019.

[3] https://www.eci.gov.in/files/file/9400-hand-book-for-returning-officer-february-2019/.

[4] https://www.eci.gov.in/faqs/elections/election-machinery/faqs-election-machinery-r1/.

[5] https://www.eci.gov.in/files/file/10197-mandatory-verification-of-vvpat-paper-slips-regarding/.