Applications for the LAMP Fellowship 2025-26 will open soon. Sign up here to be notified when the dates are announced.
The National Medical Commission Bill, 2017 was introduced in Lok Sabha recently and is listed for consideration and passage today.[1] The Bill seeks to regulate medical education and practice in India. To meet this objective, the Bill repeals the Indian Medical Council Act, 1956 and dissolves the current Medical Council of India (MCI). The MCI was established under the 1956 Act, to establish uniform standards of higher education qualifications in medicine and regulating its practice.[2]
A Committee was set up in 2016, under the NITI Aayog with Dr. Arvind Panagariya as its chair, to review the 1956 Act and recommend changes to improve medical education and the quality of doctors in India.[3] The Committee proposed that the Act be replaced by a new law, and also proposed a draft Bill in August 2016.
This post looks at the key provisions of the National Medical Commission Bill, 2017 introduced in Lok Sabha recently, and some issues which have been raised over the years regarding the regulation of medical education and practice in the country.
What are the key issues regarding the regulation of medical education and practice?
Several experts have examined the functioning of the MCI and suggested a different structure and governance system for its regulatory powers.3,[4] Some of the issues raised by them include:
Separation of regulatory powers
Over the years, the MCI has been criticised for its slow and unwieldy functioning owing to the concentration and centralisation of all regulatory functions in one single body. This is because the Council regulates medical education as well as medical practice. In this context, there have been recommendations that all professional councils like the MCI, should be divested of their academic functions, which should be subsumed under an apex body for higher education to be called the National Commission for Higher Education and Research.[5] This way there would be a separation between the regulation of medical education from regulation of medical practice.
An Expert Committee led by Prof. Ranjit Roy Chaudhury (2015), recommended structurally reconfiguring the MCI’s functions and suggested the formation of a National Medical Commission through a new Act.3 Here, the National Medical Commission would be an umbrella body for supervision of medical education and oversight of medial practice. It will have four segregated verticals under it to look at: (i) under-graduate medical education, (ii) post-graduate medical education, (iii) accreditation of medical institutions, and (iv) the registration of doctors. The 2017 Bill also creates four separate autonomous bodies for similar functions.
Composition of MCI
With most members of the MCI being elected, the NITI Aayog Committee (2016) noted the conflict of interest where the regulated elect the regulators, preventing the entry of skilled professionals for the job. The Committee recommended that a framework must be set up under which regulators are appointed through an independent selection process instead.
Fee Regulation
The NITI Aayog Committee (2016) recommended that a medical regulatory authority, such as the MCI, should not engage in fee regulation of private colleges. Such regulation of fee by regulatory authorities may encourage an underground economy for medical education seats with capitation fees (any payment in excess of the regular fee), in regulated private colleges. Further, the Committee stated that having a fee cap may discourage the entry of private colleges limiting the expansion of medical education in the country.
Professional conduct
The Standing Committee on Health (2016) observed that the present focus of the MCI is only on licensing of medical colleges.4 There is no emphasis given to the enforcement of medical ethics in education and on instances of corruption noted within the MCI. In light of this, the Committee recommended that the areas of medical education and medical practice should be separated in terms of enforcement of the appropriate ethics for each of these stages.
What does the National Medical Commission, 2017 Bill seek do to?
The 2017 Bill sets up the National Medical Commission (NMC) as an umbrella regulatory body with certain other bodies under it. The NMC will subsume the MCI and will regulate the medical education and practice in India. Under the Bill, states will establish their respective State Medical Councils within three years. These Councils will have a role similar to the NMC, at the state level.
Functions of the NMC include: (i) laying down policies for regulating medical institutions and medical professionals, (ii) assessing the requirements of human resources and infrastructure in healthcare, (iii) ensuring compliance by the State Medical Councils with the regulations made under the Bill, and (iv) framing guidelines for determination of fee for up to 40% of the seats in the private medical institutions and deemed universities which are governed by the Bill.
Who will be a part of the NMC?
The NMC will consist of 25 members, appointed by the central government. It will include representatives from Indian Council of Medical Research, and Directorate General of Health Services. A search committee will recommend names to the central government for the post of Chairperson, and the part-time members. These posts will have a maximum term of four years, and will not be eligible for extension or reappointment.
What are the regulatory bodies being set up under the NMC?
The Bill sets up four autonomous boards under the supervision of the NMC, as recommended by various experts. Each autonomous board will consist of a President and two members, appointed by the central government (on the recommendation of the search committee). These bodies are:
What does the Bill say regarding the conduct of medical entrance examinations?
There will be a uniform National Eligibility-cum-Entrance Test (NEET) for admission to under-graduate medical education in all medical institutions governed by the Bill. The NMC will specify the manner of conducting common counselling for admission in all such medical institutions.
Further, there will be a National Licentiate Examination for the students graduating from medical institutions to obtain the license for practice. This Examination will also serve as the basis for admission into post-graduate courses at medical institutions.
————————————————————–
[1] The National Medical Commission Bill, 2017, http://www.prsindia.org/uploads/media/medical%20commission/National%20Medical%20Commission%20Bill,%202017.pdf.
[2] Indian Medical Council Act, 1933.
[3] A Preliminary Report of the Committee on the Reform of the Indian Medical Council Act, 1956, NITI Aayog, August 7, 2016, http://niti.gov.in/writereaddata/files/document_publication/MCI%20Report%20.pdf.
[4] “Report no. 92: Functioning of the Medical Council of India”, Standing Committee on Health and Family Welfare, March 8, 2016, http://164.100.47.5/newcommittee/reports/EnglishCommittees/Committee%20on%20Health%20and%20Family%20Welfare/92.pdf
[5] “Report of the Committee to Advise on Renovation and Rejuvenation of Higher Education”, Ministry of Human Resource Development, 2009, http://mhrd.gov.in/sites/upload_files/mhrd/files/document-reports/YPC-Report.pdf.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
Method of calculation |
Recommendation and its status |
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.