Applications for the LAMP Fellowship 2025-26 will open soon. Sign up here to be notified when the dates are announced.

Early this week, the Comptroller and Auditor General (CAG) of India tabled a report on the finances of Uttar Pradesh for the financial year 2020-21.  A few days prior to that, on May 26, the budget for Uttar Pradesh for 2022-23 was presented, along with which the final audited expenditure and receipt figures for the year 2020-21 were released.  The year 2020-21 presented a two-fold challenge for states – loss in revenue due to impact of COVID-19 pandemic and lockdown, and the need for increased expenditure to support affected persons and economic recovery.  CAG noted that Uttar Pradesh’s GSDP grew by 1.05% in 2020-21 as compared to a growth of 6.5% in 2019-20.  The state reported a revenue deficit of Rs 2,367 crore in 2020-21 after reporting revenue surplus for 14 successive years since 2006-07.  Revenue deficit is the excess of revenue expenditure over revenue receipts.  This blog looks at the key trends in the finances of Uttar Pradesh in 2020-21 and certain observations by CAG on fiscal management by the state.

Spending and Deficits in 2020-21

Underspending:  In 2020-21, total spending by the state was 26% less than the budget estimate presented in February 2020.  In sectors such as water supply and sanitation, the actual expenditure was 60% less than the amount budgeted, while in agriculture and allied activities only 53% of the budgeted amount was spent.  CAG observed that in 251 schemes across 57 departments, the state government did not incur any expenditure in 2020-21.  These schemes had a budget provision of at least one crore rupees, and had cumulative allocation of Rs 50,617 crore.  These included schemes such as Pipe Drinking Water Scheme in Bundelkhand/Vindhya and apportionment of pension liabilities.  Moreover, the overall savings due to non-utilisation of funds in 2020-21 was 27.28% of total budget provisions.  CAG observed that the budgetary provisions increased between 2016 and 2021.  However, the utilisation of budget provisions reduced between 2018-19 and 2020-21.

Pattern of spending: CAG observed that in case of 12 departments, more than 50% of the expenditure was incurred in March 2021, the last month of the financial year.  In the civil aviation department, 89% of the total expenditure was incurred in March while this figure was 62% for the social welfare department (welfare of handicapped and backward classes).  CAG noted that maintaining a steady pace of expenditure is a sound practice under public financial management.  However, the Uttar Pradesh Budget Manual has no specific instructions for preventing such bunching of expenditure.  The CAG recommended that the state government can consider issuing guidelines to control the rush of expenditure towards the closing months of the financial year.

Management of deficit and debt: As a measure to mitigate the impact of COVID-19, an Ordinance was promulgated in June 2020 to raise the fiscal deficit limit from 3% of GSDP to 5% of GSDP for the year 2020-21.   Fiscal deficit represents the gap between expenditure and receipts in a year, and this gap is filled with borrowings.   The Uttar Pradesh Fiscal Responsibility and Budget Management Act, 2004 (FRBM Act) passed by Uttar Pradesh Assembly specifies the upper limit for debt and deficits.  The Ordinance thus permitted the state government to borrow more to sustain its budget expenditure.  The fiscal deficit of the state in 2020-21 was 3.20% of GSDP, well below the revised limit. At the same time, the state’s outstanding debt to GSDP in 2020-21 was 32.77% of GSDP, above the target of 32% of GSDP set under the FRBM Act.  Outstanding debt represents accumulation of debt over the years.  

Table 1: Spending by Uttar Pradesh in 2020-21 as compared to Budget Estimates (in Rs crore)

Particular

2020-21 BE

2020-21 Actuals

% change from BE to Actuals

Net Receipts (1+2)

4,24,767

2,97,311

-30%

1. Revenue Receipts (a+b+c+d)

4,22,567

2,96,176

-30%

a. Own Tax Revenue

1,58,413

1,19,897

-24%

b. Own Non-Tax Revenue

31,179

11,846

-62%

c. Share in central taxes

1,52,863

1,06,687

-30%

d. Grants-in-aid from the Centre

80,112

57,746

-28%

Of which GST compensation grants

7,608

9,381

23%

2. Non-Debt Capital Receipts

2,200

1,135

-48%

3. Borrowings

75,791

86,859

15%

Of which GST compensation loan

-

6,007

-

Net Expenditure (4+5+6)

4,77,963

3,51,933

-26%

4. Revenue Expenditure

3,95,117

2,98,543

-24%

5. Capital Outlay

81,209

52,237

-36%

6. Loans and Advances

1,637

1,153

-30%

7. Debt Repayment

34,897

26,777

-23%

Revenue Balance

27,451

-2,367

-109%

Revenue Balance (as % of GSDP)

1.53%

-0.14%

 

Fiscal Deficit

53,195

54,622

3%

Fiscal Deficit (as % of GSDP)

2.97%

3.20%

 

Note: A negative revenue balance indicates a deficit.  The actual fiscal deficit reported by Uttar Pradesh for 2020-21 in 2022-23 budget was 2.8% of GSDP.  This difference was due to higher GSDP figure reported by the state.  
Sources: Uttar Pradesh Budget Documents of various years; CAG; PRS.

Finances of State Public Sector Undertakings

Public sector undertakings (PSUs) are set up by the government to discharge commercial activities in various sectors.  As on March 31, 2021, there were 115 PSUs in Uttar Pradesh.  CAG analysed the performance of 38 PSUs.   Out of these 38 PSUs, 22 companies earned a profit of Rs 700 crore, while 16 companies posted a loss of Rs 7,411 crore in 2020-21.  Note that both the number of PSUs incurring losses and the quantum of losses has decreased since 2018-19.  In 2018-19, 20 PSUs had reported losses worth Rs 15,219 crore.  

Figure 1: Cumulative losses incurred by Uttar Pradesh PSUs (Rs crore)
 
 image
 Sources: CAG; PRS.

Losses of power sector PSUs: Three power sector PSUs—Uttar Pradesh Power Corporation Limited, Purvanchal Vidyut Vitran Nigam Limited, and Paschimanchal Vidyut Vitran Nigam Limited—were the top loss incurring PSUs.  These three PSUs accounted for 73% of the total losses of Rs 7,411 crore mentioned above.   Note that as of June 2022, for each unit of power supplied, the revenue realised by UP power distribution companies (discoms) is 27 paise less than cost of supply.  This is better than the gap of 34 paise per unit at the national level.   However, the aggregate technical and commercial losses (AT&C) of the Uttar Pradesh discoms was 27.85%, considerably higher than the national average of 17.19%.  AT&C losses refer to the proportion of power supplied by a discom for which it does not receive any payment.

Off-budget borrowings: CAG also observed that the Uttar Pradesh government resorted to off-budget borrowing through state owned PSUs/authorities.  Off budget borrowings are not accounted in the debt of the state government and are on books of the respective PSUs/authorities, although, debt is serviced by the state government.  As a result, the outstanding debt reported in the budget does not represent the actual debt position of the state.  CAG identified off-budget borrowing worth Rs 1,637 crore.  The CAG recommended that the state government should avoid extra-budget borrowings.  It should also credit all the loans taken by PSUs/authorities on behalf of and serviced by the state government to state government accounts.

Management of Reserve Funds

The Reserve Bank of India manages two reserve funds on the behalf of state governments.   These funds are created to meet the liabilities of state governments.  These funds are: (i) Consolidated Sinking Fund (CSF), and (ii) Guarantee Redemption Fund (GRF).  They are funded by the contributions made by the state governments.  CSF is an amortisation fund which is utilised to meet the repayment obligations of the government.  Amortisation refers to payment of debt through regular instalments.  The interest accumulated in the fund is used for repayment of outstanding liabilities (which is the accumulation of total borrowings at the end of a financial year, including any liabilities on the public account).  

In line with the recommendation of the 12th Finance Commission, Uttar Pradesh created its CSF in March 2020.  The state government may transfer at least 0.5% of its outstanding liabilities at the end of the previous year to the CSF.  CAG observed that in 2020-21, Uttar Pradesh appropriated only Rs 1,000 crore to the CSF against the requirement of Rs 2,454 crore.  CAG recommended that the state government should ensure at least 0.5% of the outstanding liabilities are contributed towards the CSF every year.

GRF is constituted by states to meet obligations related to guarantees.  The state government may extend guarantee on loans taken by its PSUs.  Guarantees are contingent liabilities of the state government, as in case of default by the company, repayment burden will fall on the state government.  GRF can be used to settle guarantees extended by the government with respect to borrowings of state PSUs and other bodies.  The 12th Finance Commission had recommended that states should constitute GRF.  It was to be funded through guarantees fees to meet any sudden discharge of obligated guarantees extended by the states.  CAG noted that Uttar Pradesh government has not constituted GRF.  Moreover, the state has also not fixed any limits for extending guarantees.  

For an analysis of Uttar Pradesh’s 2022-23 budget, please see here.

The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.

In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.   

What is the inflation targeting framework, and what happens if inflation is persistently high?

In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.

As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.  

Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).

Figure 1: Consumer price index (year-on-year; in percentage)

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.   

The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.

Breaking down the Consumer Price Index and the Wholesale Price Index

Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.

Table 1: Assigned weights for the calculation of CPI

Category

Weight

Food and beverages

46%

Miscellaneous (including petrol and diesel, health, and education)

28%

Housing

10%

Clothing and footwear

7%

Fuel and light

7%

Pan, tobacco, and intoxications

2%

Total

100%

Sources: MOSPI; PRS.

Table 2: Average inflation of some CPI components
between February 2022 to August 2022 (in percentage)

Subcategory of CPI

Average inflation

Vegetables 

13.26%

Oils and fats

12.46%

Footwear

11.41%

Fuel and Light

9.88%

Transport and communication

7.74%

Cereals and products

6.05%

Sources: Database on Indian Economy, RBI; PRS.

CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.   

Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal.  WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil.

Table 3:Assigned weights for the
calculation of WPI (in percentage)

Category

Weight

Manufactured products

64%

Primary articles

23%

Fuel and power

12%

All commodities

100%

Sources: Ministry of Commerce and Industry; PRS.

Why has WPI inflation been consistently above CPI inflation?

Movements in the WPI have an impact on the CPI.  For almost a year and half, CPI inflation has remained below WPI inflation.  However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag.  This is because retail prices include taxes (as a percentage of price), while wholesale prices do not.  Additionally, some of the goods in WPI act as inputs in the goods considered in CPI.  An increase in input prices would lead to higher retail prices after a time lag.

We discuss possible reasons for why CPI has remained below WPI for a year and a half.

Figure 2: Consumer Price Index and Wholesale Price Index

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

Composition of indices

As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022.  They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.

The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.