Applications for LAMP Fellowship 2025-26 are now open. Apply here. The last date for submitting applications is December 21, 2024
Early this week, the Comptroller and Auditor General (CAG) of India tabled a report on the finances of Uttar Pradesh for the financial year 2020-21. A few days prior to that, on May 26, the budget for Uttar Pradesh for 2022-23 was presented, along with which the final audited expenditure and receipt figures for the year 2020-21 were released. The year 2020-21 presented a two-fold challenge for states – loss in revenue due to impact of COVID-19 pandemic and lockdown, and the need for increased expenditure to support affected persons and economic recovery. CAG noted that Uttar Pradesh’s GSDP grew by 1.05% in 2020-21 as compared to a growth of 6.5% in 2019-20. The state reported a revenue deficit of Rs 2,367 crore in 2020-21 after reporting revenue surplus for 14 successive years since 2006-07. Revenue deficit is the excess of revenue expenditure over revenue receipts. This blog looks at the key trends in the finances of Uttar Pradesh in 2020-21 and certain observations by CAG on fiscal management by the state.
Spending and Deficits in 2020-21
Underspending: In 2020-21, total spending by the state was 26% less than the budget estimate presented in February 2020. In sectors such as water supply and sanitation, the actual expenditure was 60% less than the amount budgeted, while in agriculture and allied activities only 53% of the budgeted amount was spent. CAG observed that in 251 schemes across 57 departments, the state government did not incur any expenditure in 2020-21. These schemes had a budget provision of at least one crore rupees, and had cumulative allocation of Rs 50,617 crore. These included schemes such as Pipe Drinking Water Scheme in Bundelkhand/Vindhya and apportionment of pension liabilities. Moreover, the overall savings due to non-utilisation of funds in 2020-21 was 27.28% of total budget provisions. CAG observed that the budgetary provisions increased between 2016 and 2021. However, the utilisation of budget provisions reduced between 2018-19 and 2020-21.
Pattern of spending: CAG observed that in case of 12 departments, more than 50% of the expenditure was incurred in March 2021, the last month of the financial year. In the civil aviation department, 89% of the total expenditure was incurred in March while this figure was 62% for the social welfare department (welfare of handicapped and backward classes). CAG noted that maintaining a steady pace of expenditure is a sound practice under public financial management. However, the Uttar Pradesh Budget Manual has no specific instructions for preventing such bunching of expenditure. The CAG recommended that the state government can consider issuing guidelines to control the rush of expenditure towards the closing months of the financial year.
Management of deficit and debt: As a measure to mitigate the impact of COVID-19, an Ordinance was promulgated in June 2020 to raise the fiscal deficit limit from 3% of GSDP to 5% of GSDP for the year 2020-21. Fiscal deficit represents the gap between expenditure and receipts in a year, and this gap is filled with borrowings. The Uttar Pradesh Fiscal Responsibility and Budget Management Act, 2004 (FRBM Act) passed by Uttar Pradesh Assembly specifies the upper limit for debt and deficits. The Ordinance thus permitted the state government to borrow more to sustain its budget expenditure. The fiscal deficit of the state in 2020-21 was 3.20% of GSDP, well below the revised limit. At the same time, the state’s outstanding debt to GSDP in 2020-21 was 32.77% of GSDP, above the target of 32% of GSDP set under the FRBM Act. Outstanding debt represents accumulation of debt over the years.
Table 1: Spending by Uttar Pradesh in 2020-21 as compared to Budget Estimates (in Rs crore)
Particular |
2020-21 BE |
2020-21 Actuals |
% change from BE to Actuals |
Net Receipts (1+2) |
4,24,767 |
2,97,311 |
-30% |
1. Revenue Receipts (a+b+c+d) |
4,22,567 |
2,96,176 |
-30% |
a. Own Tax Revenue |
1,58,413 |
1,19,897 |
-24% |
b. Own Non-Tax Revenue |
31,179 |
11,846 |
-62% |
c. Share in central taxes |
1,52,863 |
1,06,687 |
-30% |
d. Grants-in-aid from the Centre |
80,112 |
57,746 |
-28% |
Of which GST compensation grants |
7,608 |
9,381 |
23% |
2. Non-Debt Capital Receipts |
2,200 |
1,135 |
-48% |
3. Borrowings |
75,791 |
86,859 |
15% |
Of which GST compensation loan |
- |
6,007 |
- |
Net Expenditure (4+5+6) |
4,77,963 |
3,51,933 |
-26% |
4. Revenue Expenditure |
3,95,117 |
2,98,543 |
-24% |
5. Capital Outlay |
81,209 |
52,237 |
-36% |
6. Loans and Advances |
1,637 |
1,153 |
-30% |
7. Debt Repayment |
34,897 |
26,777 |
-23% |
Revenue Balance |
27,451 |
-2,367 |
-109% |
Revenue Balance (as % of GSDP) |
1.53% |
-0.14% |
|
Fiscal Deficit |
53,195 |
54,622 |
3% |
Fiscal Deficit (as % of GSDP) |
2.97% |
3.20% |
Note: A negative revenue balance indicates a deficit. The actual fiscal deficit reported by Uttar Pradesh for 2020-21 in 2022-23 budget was 2.8% of GSDP. This difference was due to higher GSDP figure reported by the state.
Sources: Uttar Pradesh Budget Documents of various years; CAG; PRS.
Finances of State Public Sector Undertakings
Public sector undertakings (PSUs) are set up by the government to discharge commercial activities in various sectors. As on March 31, 2021, there were 115 PSUs in Uttar Pradesh. CAG analysed the performance of 38 PSUs. Out of these 38 PSUs, 22 companies earned a profit of Rs 700 crore, while 16 companies posted a loss of Rs 7,411 crore in 2020-21. Note that both the number of PSUs incurring losses and the quantum of losses has decreased since 2018-19. In 2018-19, 20 PSUs had reported losses worth Rs 15,219 crore.
Figure 1: Cumulative losses incurred by Uttar Pradesh PSUs (Rs crore)
Sources: CAG; PRS.
Losses of power sector PSUs: Three power sector PSUs—Uttar Pradesh Power Corporation Limited, Purvanchal Vidyut Vitran Nigam Limited, and Paschimanchal Vidyut Vitran Nigam Limited—were the top loss incurring PSUs. These three PSUs accounted for 73% of the total losses of Rs 7,411 crore mentioned above. Note that as of June 2022, for each unit of power supplied, the revenue realised by UP power distribution companies (discoms) is 27 paise less than cost of supply. This is better than the gap of 34 paise per unit at the national level. However, the aggregate technical and commercial losses (AT&C) of the Uttar Pradesh discoms was 27.85%, considerably higher than the national average of 17.19%. AT&C losses refer to the proportion of power supplied by a discom for which it does not receive any payment.
Off-budget borrowings: CAG also observed that the Uttar Pradesh government resorted to off-budget borrowing through state owned PSUs/authorities. Off budget borrowings are not accounted in the debt of the state government and are on books of the respective PSUs/authorities, although, debt is serviced by the state government. As a result, the outstanding debt reported in the budget does not represent the actual debt position of the state. CAG identified off-budget borrowing worth Rs 1,637 crore. The CAG recommended that the state government should avoid extra-budget borrowings. It should also credit all the loans taken by PSUs/authorities on behalf of and serviced by the state government to state government accounts.
Management of Reserve Funds
The Reserve Bank of India manages two reserve funds on the behalf of state governments. These funds are created to meet the liabilities of state governments. These funds are: (i) Consolidated Sinking Fund (CSF), and (ii) Guarantee Redemption Fund (GRF). They are funded by the contributions made by the state governments. CSF is an amortisation fund which is utilised to meet the repayment obligations of the government. Amortisation refers to payment of debt through regular instalments. The interest accumulated in the fund is used for repayment of outstanding liabilities (which is the accumulation of total borrowings at the end of a financial year, including any liabilities on the public account).
In line with the recommendation of the 12th Finance Commission, Uttar Pradesh created its CSF in March 2020. The state government may transfer at least 0.5% of its outstanding liabilities at the end of the previous year to the CSF. CAG observed that in 2020-21, Uttar Pradesh appropriated only Rs 1,000 crore to the CSF against the requirement of Rs 2,454 crore. CAG recommended that the state government should ensure at least 0.5% of the outstanding liabilities are contributed towards the CSF every year.
GRF is constituted by states to meet obligations related to guarantees. The state government may extend guarantee on loans taken by its PSUs. Guarantees are contingent liabilities of the state government, as in case of default by the company, repayment burden will fall on the state government. GRF can be used to settle guarantees extended by the government with respect to borrowings of state PSUs and other bodies. The 12th Finance Commission had recommended that states should constitute GRF. It was to be funded through guarantees fees to meet any sudden discharge of obligated guarantees extended by the states. CAG noted that Uttar Pradesh government has not constituted GRF. Moreover, the state has also not fixed any limits for extending guarantees.
For an analysis of Uttar Pradesh’s 2022-23 budget, please see here.
Several Rajya Sabha seats go to elections this year. The President and the Vice-President are also due to be elected by August. We analyse the impact of the recent State Assembly elections on the composition of the Rajya Sabha and the outcome of the Presidential polls. Rajya Sabha - How will its composition change? Since Rajya Sabha members are elected by the elected members of State Legislative Assemblies, a change in the composition of State Assemblies can affect the composition of Rajya Sabha. A total of 61 Rajya Sabha seats are up for election in April and July. This includes 10 seats from Uttar Pradesh and 1 seat from Uttarakhand. In light of the recent Assembly elections, we work out two scenarios to estimate the composition of Rajya Sabha in 2012. Members of Rajya Sabha are elected through the system of proportional representation by means of the Single Transferable Vote (STV). In an STV election, a candidate is required to achieve a certain minimum number of votes (called the 'quota') to be elected. (For more details on the STV system, click here) For instance, in the case of Uttar Pradesh (UP) 10 Rajya Sabha seats go to election this year. Candidates will be elected to these 10 seats by the 403 elected MLAs of the Uttar Pradesh State Assembly. Each MLA will rank the candidates based on his/ her preference. After successive rounds of elimination, candidates who are able to secure at least 37 {or 403/(10+1) } votes will be declared elected. In the new UP Assembly, Samajwadi Party (SP) has a total strength of 224 members. As a result, SP can elect at least 6 (or 224/37) Rajya Sabha MPs of its choice. BSP's strength of 80 will allow it to elect 2 (or 80/37) MPs to Rajya Sabha. Similarily, the BJP with a strength of 47 MLAs can have one candidate of its choice elected to the Rajya Sabha. This leaves 1 seat. The fate of this seat depends on the alliances that may be formed since no other party in UP has 37 or more seats in the Assembly. If the Congress (28 seats) and RLD (9 seats) join hands, they may be able to elect a candidate of their choice. We build two scenarios which give the likely range of seats for the major coalitions and parties. The actual result will likely fall between these scenarios, depending on alliances for each election. Of the two scenarios, Scenario II is better for the UPA. It is based on the assumption that the UPA is able to put together the necessary support/ alliances to get its candidates elected to seats with indeterminate status. Scenario I is based on the assumption that the UPA is not able to put together the required support. As a result, the seats in question get allocated to candidates from other parties/ coalitions. (See Notes for the composition of the coalitions) Composition of Rajya Sabha
Party/ Coalition | Current composition | Scenario I | Scenario II |
Total seats |
245 |
245 |
245 |
UPA |
93 |
95 |
98 |
NDA |
66 |
67 |
65 |
Left |
19 |
14 |
14 |
BSP |
18 |
15 |
15 |
SP |
5 |
9 |
9 |
BJD |
6 |
8 |
7 |
AIADMK |
5 |
5 |
5 |
Nominated |
7 |
12 |
12 |
Others |
21 |
20 |
20 |
Vacant |
5 |
0 |
0 |
It appears that there would not be a major change in the composition of the Rajya Sabha. Which party's candidate is likely to become the next President? The next Presidential election will be held in June or July. The electoral college for the Presidential election consists of the elected members of Lok Sabha, Rajya Sabha and all Legislative Assemblies. Each MP/ MLA’s vote has a pre-determined value based on the population they represent. For instance, an MP's vote has a value of 708, an MLA from UP has a vote value of 208 and an MLA from Sikkim has a vote value of 7. (Note that all MPs, irrespective of the constituency or State they represent, have equal vote value) As is evident, changes in the composition of Assemblies in larger States such as UP can have a major impact on the outcome of the Presidential election. The elections to the office of the President are held through the system of proportional representation by means of STV (same as in the case of Rajya Sabha). The winning candidate must secure at least 50% of the total value of votes polled. (For details, refer to this Election Commission document). By this calculation, a candidate will need at least 5,48,507 votes to be elected as the President. If the UPA were to vote as a consolidated block, its vote tally would reach 4,50,555 votes under Scenario II (the one that is favourable for the UPA). Therefore, the UPA will have to seek alliances if it wants a candidate of its choice to be elected to the office of the President. Scenarios for Presidential elections (figures represent the value of votes available with each party/ coalition)
Party/ Coalition | Scenario I | Scenario II |
UPA |
4,48,431 |
4,50,555 |
NDA |
3,05,328 |
3,03,912 |
Left |
51,574 |
51,574 |
BSP |
43,723 |
43,723 |
SP |
69,651 |
69,651 |
BJD |
30,923 |
30,215 |
AIADMK |
36,216 |
36,216 |
Others |
1,11,166 |
1,11,166 |
Total |
10,97,012 |
10,97,012 |
Minimum required to be elected |
5,48,507 |
5,48,507 |
What about the Vice-President? Elections to the office of the Vice-President (VP) will be held in July or August. The electoral college will consist of all members of Lok Sabha and Rajya Sabha (i.e. both elected and nominated). Unlike the Presidential elections, all votes will have an equal value of one. Like the President, the VP is also elected through the system of proportional representation by means of STV. The winning candidate must secure at least 50% of the total value of votes polled. Presently, two seats are vacant in the Lok Sabha. If we exclude these from our analysis, we find that a candidate will need at least 395 votes to be elected as the VP. Under our best case scenario, the UPA holds 363 votes in the forthcoming VP elections. As is the case with Presidential elections, the UPA will have to seek alliances to get a candidate of its choice elected to the office of the Vice-President. Scenarios for VP elections (figures represent the value of votes available with each party/ coalition)
Party/ Coalition |
Scenario I |
Scenario II |
UPA |
360 |
363 |
NDA |
216 |
214 |
Left |
38 |
38 |
BSP |
36 |
36 |
SP |
31 |
31 |
BJD |
22 |
21 |
AIADMK |
14 |
14 |
Nominated |
14 |
14 |
Others |
57 |
57 |
Total |
788 |
788 |
Minimum required to be elected |
395 |
395 |
Notes: [1] UPA: Congress, Trinamool, DMK, NCP,Rashtriya Lok Dal, J&K National Conference, Muslim League Kerala State Committee, Kerala Congress (M), All India Majlis-e-Ittehadul Muslimeen, Sikkim Democratic Front, Praja Rajyam Party, Viduthalai Chiruthaigal Katchi [2] NDA: BJP, JD(U), Shiv Sena, Shiromani Akali Dal [3] Left: CPI(M), CPI, Revolutionary Socialist Party,All India Forward Bloc