Applications for the LAMP Fellowship 2025-26 will open soon. Sign up here to be notified when the dates are announced.

The protests against the nuclear power plant at Kudankulam have intensified over the recent weeks.  The Kudankulam plant is expected to provide 2 GW of electricity annually.  However, activists concerned about the risks of nuclear energy are demanding that the plant be shut down.  The safety of nuclear power plants is a technical matter.  In this blog post we discuss the present mechanism to regulate nuclear energy and the legislative proposals to amend this mechanism. Atomic materials and atomic energy are governed by the Atomic Energy Act, 1962.  The Act empowers the central government to produce, develop and use atomic energy.  At present, nuclear safety is regulated by the Atomic Energy Regulatory Board (AERB).  Some of the drawbacks of the present mechanism are discussed below. Key issues under the present nuclear safety regulatory mechanism The AERB is not empowered to operate as an independent operator.  The AERB was established by the government through a notification and not through an Act of Parliament.  Its powers and functions are therefore amendable by the Department of Atomic Energy through executive orders.  The parliamentary oversight exercised upon such executive action is lower than the parliamentary oversight over statutes. [1. The executive action or the Rules are in force from the date of their notification.  They are to be tabled before Parliament mandatorily.  However, an executive action is discussed and put to vote in Parliament only if an objection is raised by a Member of Parliament.  The executive orders may be reviewed by the committee on sub-ordinate legislation.  However, this committee has to oversee a large volume of rules and regulations.  For instance, there were 1264 statutory notifications that were tabled before the Rajya Sabha in 2011-12.] Furthermore, the Atomic Energy Commission that sets out the atomic energy policy, and oversees the functioning of the AERB, is headed by the Secretary, Department of Atomic Energy.  This raises a conflict of interest, as the Department exercises administrative control over NPCIL that operates nuclear power plants. It is pertinent to note that various committee reports, including a CAG Report in 2011, had highlighted the drawbacks in the present regulatory mechanisms and recommended the establishment of a statutory regulator.  A summary of the Report may be accessed here. Proposed mechanism Following the Fukushima nuclear incident in 2011, the Nuclear Safety Regulatory Authority Bill, 2011 was introduced in Parliament to replace the AERB. The Bill establishes the Nuclear Safety Regulatory Authority (NSRA) to regulate nuclear safety, and a Nuclear Safety Council to oversee nuclear safety policies that the NSRA issues.  Under the Bill, all activities related to nuclear power and nuclear materials may only be carried out under a licence issued by the NSRA. Extent of powers and independence of the NSRA The Bill establishes the NSRA as a statutory authority that is empowered to issue nuclear safety policies and regulations.  The Nuclear Safety Council established under the Bill to oversee these policies includes the Secretary, Department of Atomic Energy.  The conflict of interest that exists under the present mechanism may thus continue under the proposed regulatory system. The Bill provides that members of the NSRA can be removed by an order of the central government without a judicial inquiry.  This may affect the independence of the members of the NSRA.  This process is at variance with enactments that establish other regulatory authorities such as TRAI and the Competition Commission of India.  These enactments require a judicial inquiry prior to the removal of a member if it is alleged that he has acquired interest that is prejudicial to the functions of the authority. The proposed legislation also empowers the government to exclude strategic facilities from the ambit of the NSRA.  The government can decide whether these facilities should be brought under the jurisdiction of another regulatory authority. These and other issues arising from the Bill are discussed here.


The increasing Non-Performing Assets (NPAs) in the Indian banking sector has recently been the subject of much discussion and scrutiny.  Yesterday, the Supreme Court struck down a circular dated February 12, 2018 issued by the Reserve Bank of India (RBI).  The RBI circular laid down a revised framework for the resolution of stressed assets.  In this blog, we examine the extent of NPAs in India, and recent events leading up to the Supreme Court judgement.

What is the extent and effect of the NPA problem in India?

Banks give loans and advances to borrowers. Based on the performance of the loan, it may be categorised as: (i) a standard asset (a loan where the borrower is making regular repayments), or (ii) a non-performing asset. NPAs are loans and advances where the borrower has stopped making interest or principal repayments for over 90 days.

As of 2018, the total NPAs in the economy stand at Rs 9.6 lakh crore.  About 88% of these NPAs are from loans and advances of public sector banks.  Banks are required to lend a certain percentage of their loans to priority sectors.  These sectors are identified by the RBI and include agriculture, housing, education and small scale industries.[1]  In 2018, of the total NPAs, 22% were from priority sector loans, and 78% were from non-priority sector loans. 

In the last few years, gross NPAs of banks (as a percentage of total loans) have increased from 2.3% of total loans in 2008 to 9.3% in 2017 (see Figure 1). This indicates that an increasing proportion of a bank’s assets have ceased to generate income for the bank, lowering the bank’s profitability and its ability to grant further credit.

Figure 1: Gross NPAs (% of total loans)

Source: Reserve Bank of India; PRS

What has been done to address the problem of growing NPAs?

The measures taken to resolve and prevent NPAs can broadly be classified into two kinds – first, remedial measures for banks prescribed by the RBI for internal restructuring of stressed assets, and second, legislative means of resolving NPAs under various laws (like the Insolvency and Bankruptcy Code, 2016).

Remedial Measures

Over the years, the RBI has issued various guidelines for banks aimed at the resolution of stressed assets in the economy. These included introduction of certain schemes such as: (i) Strategic Debt Restructuring (which allowed banks to change the management of the defaulting company), and (ii) Joint Lenders’ Forum (where lenders evolved a resolution plan and voted on its implementation).   A summary of the various schemes implemented by the RBI is provided in Table 1. 

Table 1: Non-legislative loan recovery framework

Loan restructuring

  • Banks internally undertake restructuring of loans, if the borrower is unable to repay the amount.  This involves changing the terms of repayment, which includes altering the payment schedule of loans or interest rates.

Corporate Debt Restructuring

  • Allows for restructuring of a borrower’s outstanding loans from more than one bank.  This mechanism is available if the borrower’s outstanding loans are more than Rs 10 crore.[2]

Joint Lender's Forum

  • Lenders evolve an action plan to resolve the NPA of a defaulter.[3]  If 60% of the creditors by value, and 50% of the creditors by number agree, a recovery plan will be implemented.[4]

5:25 Scheme

  • Banks can extend loan term to 25 years based on cash flow of projects for which the loan was given.  Interest rates and other terms of the loans may be readjusted every five years.[5]

Strategic Debt Restructuring

  • Banks convert their debt into equity to hold a majority of shares in a company.  This allows banks to change the management of the defaulting company.[6]

Sustainable Structuring of Stressed Assets

  • Allows for conversion of a part of the outstanding debt to equity or preference shares if: (i) project for which loan was taken has commenced operations, and (ii) borrower can repay over 50% of the loan.[7]

Sources: RBI scheme guidelines; Economic Survey 2016-17; PRS.

Legislative Measures

  • The Insolvency and Bankruptcy Code (IBC) was enacted in May 2016 to provide a time-bound 180-day recovery process for insolvent accounts. When a default occurs, the creditors or debtor may apply to the National Company Law Tribunal for initiating the resolution process. Once the application is approved, the resolution process will have to be completed within 180 days (extendable by 90 days) from the date of approval.  The resolution process will be presided over by an insolvency professional to decide whether to restructure the loan, or to sell the defaulter’s assets to recover the outstanding amount.  If a timely decision is not arrived at, the defaulter’s assets are liquidated.
  • The Banking Regulation (Amendment) Act, 2017: The amendment allows RBI to direct banks to initiate recovery proceedings against defaulting accounts under the IBC.  Further, under Section 35AA of the Act, RBI may also issue directions to banks for resolution of specific stressed assets. 

In June 2017, an internal advisory committee of RBI identified 500 defaulters with the highest value of NPAs.[8]  The committee recommended that 12 largest non-performing accounts, each with outstanding amounts greater than Rs 5,000 crore and totalling 25% of the NPAs of the economy, be referred for resolution under the IBC immediately.  Proceedings against the 12 largest defaulters have been initiated under the IBC. 

What was the February 12 circular issued by the RBI?

Subsequent to the enactment of the IBC, the RBI put in place a framework for restructuring of stressed assets of over Rs 2,000 crore on or after March 1, 2018.  The resolution plan for such restructuring must be unanimously approved by all lenders and implemented within 180 days from the date of the first default.  If the plan is not implemented within the stipulated time period, the stressed assets are required to be referred to the NCLT under IBC within 15 days.  Further, the framework introduced a provision for early identification and categorisation of stressed assets before they are classified as NPAs.

On what grounds was the RBI circular challenged?

Borrowers whose loans were tagged as NPAs before the release of the circular recently crossed the 180-day deadline for internal resolution by banks. Some of these borrowers, including various power producers and sugar mills, had appealed against the RBI circular in various High Courts. A two-judge bench of the Allahabad High Court ruled in favour of the RBI’s powers to issue these guidelines, and refused to grant interim relief to power producers from being taken to the NCLT for bankruptcy. These batch of petitions against the circular were transferred to the Supreme Court, which issued an order in September 2018 to maintain status quo on the same.

What did the Supreme Court order?

The Court held the circular issued by RBI was outside the scope of the power given to it under Article 35AA of the Banking Regulation (Amendment) Act, 2017.  The Court reasoned that Section 35AA was proposed by the 2017 Act to authorise the RBI to issues directions only in relation to specific cases of default by specific debtors.  It held that the RBI circular issued directions in relation to debtors in general and this was outside their scope of power.  The court also held that consequently all IBC proceedings initiated under the RBI circular are quashed. 

During the proceedings, various companies argued that the RBI circular applies to all corporate debtors alike, without looking into each individual’s sectors problems and attempting to solve them.  For instance, several power companies provided sector specific reasons for delay in payment of bank dues.  The reasons included: (i) cancellation of coal blocks by the SC leading to non-availability of fuel, (ii) lack of enough power purchase agreements by states, (iii) non-payment of dues by DISCOMs, and (iv) delays in project implementation leading to cost overruns.  Note that, in its 40th report, the Parliamentary Standing Committee on Energy analysed the impact of the RBI circular on the power sector and noted that the ‘one size fits all’ approach of the RBI is erroneous. 

 

 

[1] ‘Priority Sector Lending – Targets and Classification’ Reserve Bank of India, July 2012, https://rbi.org.in/scripts/NotificationUser.aspx?Id=7460&Mode=0

[2] Revised Guidelines on Corporate Debt Restructuring Mechanism, Reserve Bank of India, https://www.rbi.org.in/upload/notification/pdfs/67158.pdf

[3] ‘Framework for Revitalising Distressed Assets in the Economy – Guidelines on Joint Lenders’ Forum (JLF) and Corrective Action Plan (CAP)’, Reserve Bank of India, February 26, 2016, https://www.rbi.org.in/scripts/NotificationUser.aspx?Id=8754&Mode=0

[4] Timelines for Stressed Assets, Press Release, Reserve Bank of India, May 5, 2017, https://www.rbi.org.in/Scripts/NotificationUser.aspx?Id=10957&Mode=0

[5] Flexible Structuring of Long Term Project Loans to Infrastructure and Core Industries, RBI, July 15, 2014, https://www.rbi.org.in/scripts/NotificationUser.aspx?Id=9101&Mode=0

[6] Chapter 4, The Economic Survey 2016-17, http://unionbudget.nic.in/es2016-17/echap04.pdf

[7] ‘RBI introduces a ‘Scheme for Sustainable Structuring of Stressed Assets’’ Press Release, Reserve Bank of India, June 13, 2016, https://www.rbi.org.in/Scripts/BS_PressReleaseDisplay.aspx?prid=37210

[8] RBI identifies Accounts for Reference by Banks under the Insolvency and Bankruptcy Code (IBC), Reserve Bank of India, June 13, 2017, https://www.rbi.org.in/scripts/BS_PressReleaseDisplay.aspx?prid=40743