Applications for the LAMP Fellowship 2025-26 will open soon. Sign up here to be notified when the dates are announced.
The protests against the nuclear power plant at Kudankulam have intensified over the recent weeks. The Kudankulam plant is expected to provide 2 GW of electricity annually. However, activists concerned about the risks of nuclear energy are demanding that the plant be shut down. The safety of nuclear power plants is a technical matter. In this blog post we discuss the present mechanism to regulate nuclear energy and the legislative proposals to amend this mechanism. Atomic materials and atomic energy are governed by the Atomic Energy Act, 1962. The Act empowers the central government to produce, develop and use atomic energy. At present, nuclear safety is regulated by the Atomic Energy Regulatory Board (AERB). Some of the drawbacks of the present mechanism are discussed below. Key issues under the present nuclear safety regulatory mechanism The AERB is not empowered to operate as an independent operator. The AERB was established by the government through a notification and not through an Act of Parliament. Its powers and functions are therefore amendable by the Department of Atomic Energy through executive orders. The parliamentary oversight exercised upon such executive action is lower than the parliamentary oversight over statutes. [1. The executive action or the Rules are in force from the date of their notification. They are to be tabled before Parliament mandatorily. However, an executive action is discussed and put to vote in Parliament only if an objection is raised by a Member of Parliament. The executive orders may be reviewed by the committee on sub-ordinate legislation. However, this committee has to oversee a large volume of rules and regulations. For instance, there were 1264 statutory notifications that were tabled before the Rajya Sabha in 2011-12.] Furthermore, the Atomic Energy Commission that sets out the atomic energy policy, and oversees the functioning of the AERB, is headed by the Secretary, Department of Atomic Energy. This raises a conflict of interest, as the Department exercises administrative control over NPCIL that operates nuclear power plants. It is pertinent to note that various committee reports, including a CAG Report in 2011, had highlighted the drawbacks in the present regulatory mechanisms and recommended the establishment of a statutory regulator. A summary of the Report may be accessed here. Proposed mechanism Following the Fukushima nuclear incident in 2011, the Nuclear Safety Regulatory Authority Bill, 2011 was introduced in Parliament to replace the AERB. The Bill establishes the Nuclear Safety Regulatory Authority (NSRA) to regulate nuclear safety, and a Nuclear Safety Council to oversee nuclear safety policies that the NSRA issues. Under the Bill, all activities related to nuclear power and nuclear materials may only be carried out under a licence issued by the NSRA. Extent of powers and independence of the NSRA The Bill establishes the NSRA as a statutory authority that is empowered to issue nuclear safety policies and regulations. The Nuclear Safety Council established under the Bill to oversee these policies includes the Secretary, Department of Atomic Energy. The conflict of interest that exists under the present mechanism may thus continue under the proposed regulatory system. The Bill provides that members of the NSRA can be removed by an order of the central government without a judicial inquiry. This may affect the independence of the members of the NSRA. This process is at variance with enactments that establish other regulatory authorities such as TRAI and the Competition Commission of India. These enactments require a judicial inquiry prior to the removal of a member if it is alleged that he has acquired interest that is prejudicial to the functions of the authority. The proposed legislation also empowers the government to exclude strategic facilities from the ambit of the NSRA. The government can decide whether these facilities should be brought under the jurisdiction of another regulatory authority. These and other issues arising from the Bill are discussed here.
The elections for the next Vice-President of India are underway today. The current Vice President Dr. Hamid Ansari will complete his second five-year term on August 10, which is in a few days. While the BJP-led NDA’s candidate is Mr. Venkaiah Naidu, Dr. Gopalkrishna Gandhi is the joint candidate fronted by 18 opposition parties led by the INC. In this post, we take a closer look at the constitutional mandate and role of the Vice-President of India and how the elections for the post will play out today.
Constitutional mandate as Vice President
The Vice-President is the second-highest constitutional office in India. He acts as the President in the absence of the incumbent President, and is the ex officio Chairman of Rajya Sabha. As an indication of his bipartisanship and apolitical character, the Vice-President does not hold membership of any political party or any other office of profit. Further, given his constitutional stature, the statements given by the Vice President assume national significance. The outgoing Vice President’s statements on issues like press freedom and welfare of minority communities led to several media debates and attracted widespread attention.
Vice-President’s role as Chairman of the Rajya Sabha
As Chairman of Rajya Sabha, the Vice President is the final authority on the interpretation of the Constitution and the Rules of Procedure for all house-related matters. His rulings constitute binding precedent. He also determines whether a Rajya Sabha member stands to be disqualified on grounds of defection. Such powers make him an important stakeholder in the functioning of our parliamentary democracy.
The Vice President is also vested with powers to improve the functioning of the Upper House. There have been several instances where the current Vice President has used his powers to address issues ranging from improving the productivity of question hour, reducing prolonged disruptions, maintaining decorum in the House, to facilitating discussion on issues of national importance.
Addressing disruptions: In March 2010, the Vice President ordered seven MPs to be evicted from the House for causing disruptions during the discussion and passage of the Women’s Reservation Bill. More recently, in December 2015, the Vice President called for an all-party meeting during the last leg of the then ongoing Winter Session to discuss the matter of continuous disruptions in the House. The remaining three days of the session after the all-party meet recorded 79% productivity, while the House had recorded overall productivity of 51% that session.
Functioning of Question Hour: In another instance, in November 2014, the Vice President issued a direction to conduct question hour from 12 noon to 1 pm instead of the originally allocated first hour of the day. This was seen as an attempt to address the issue of low productivity of question hour mostly due to disruptions at the start of the day. However, question hour productivity has not shown any significant improvement yet, with continuing disruptions.
Parliamentary Privilege: Parliamentary privilege refers to rights and immunity enjoyed by Parliament and MPs, which may be necessary to effectively discharge their constitutional functions. When disregarded, the offence is called a breach of privilege and is punishable under law. The Chairman is the guardian of these privileges and can also issue warrants to execute the orders of the House, where necessary. In 1967, one person was held to be in contempt of Rajya Sabha for throwing leaflets from the visitors’ gallery of the House. The then Vice President, in accordance with the resolution of the House, had sentenced the person to simple imprisonment, till the conclusion of that session.
The Chairman’s consent is required to raise a question of breach of privilege. He also has the discretion whether to refer it to the Privileges Committee, and whether to accept the committee’s recommendations. In October 2015, the current Vice President had referred the matter of a member’s controversial “terrorists in Parliament” remark to the Privileges Committee upon receiving complaints from several opposition MPs.
Role in Parliamentary Committees and other institutions
Parliamentary committees review proposed laws, oversee activities of the executive, and scrutinise government’s expenditure. The Vice President nominates members to various Parliamentary Committees, appoints their Chairmen and issues directions to them. The Vice President also nominates members of the Rajya Sabha on various bodies such as the Haj Committee, the Institute of Constitutional and Parliamentary Studies, Courts of several universities such as JNU, etc. He is also on the three-member Committee which nominates the Chairman of the Press Council of India.
So, how is the Vice President elected?
Unlike Presidential elections, MLAs do not have a vote in these elections. Dr. B R Ambedkar had explained why during the constituent assembly debates: “The President is the Head of the State and his powers extend both to the administration by the centre as well as of the states… But when we come to the Vice-President, his normal functions are merely to preside over the Council of States. It is only on a rare occasion, and that too for a temporary period, that he may be called upon to assume the duties of a President”.
Therefore, the Electoral College for the Vice- Presidential elections consists of all 790 MPs. The elections are conducted using the system of single transferable voting that results in (approximately) proportional representation. The voting is done through secret ballot implying that parties cannot issue whips to their MPs and anti-defection laws do not apply.
Each voter has one vote with the same value of 1. Every voter can mark as many preferences, as there are candidates contesting the election. It is necessary for at least the first preference to be marked. A candidate needs to win a required number of votes (or the quota) to be elected. If no one achieves the required quota after the first round of counting the first preference votes, the candidate with the lowest votes is eliminated. His votes are then transferred to the second preference mentioned (if any) on the votes he received. If no one achieves the required quota again, the process is repeated till either:
The upcoming Vice Presidential elections
Let us now determine the quota required for victory in today’s election. The total value of votes of the electoral college is divided by two, and one is added (to ensure a majority) to the quotient to determine the quota. Hence, the quota is calculated as:
Quota = 790/2 + 1 = 395 + 1= 396
The candidate who gets 396 votes will win the election. If no candidate gets to this mark, the second and further preferences may be counted until the mark is reached or all candidates, but one, are eliminated.
We know the number of seats held by each party in Parliament. Let us assume that all MPs vote along their party line. The position of the NDA and UPA is depicted in the figure below at the two ends of the chart. All other major parties and independents are marked in the middle.
We observe that, while the BJP falls short of the quota by 58 votes, the shortfall can be overcome if NDA allies TDP, Shiv Sena, Shiromani Akali Dal, LJP and PDP support its candidate.
With the voting taking place this morning, the outcome and results will become clear by later today. It is hoped that the new Vice President will uphold the twin constitutional mandates as the second highest constitutional functionary and the Chairman of Rajya Sabha, just as his distinguished predecessors have done.
